ABB ACS150 Component Micro Drives

Output Current4.7 A
Nominal Output Power0.75 kW1.0 Hp
TypeFrequency converter
Weight1.4 kg
Output Current6.7 A
Nominal Output Power1.1 kW1.5 Hp
TypeFrequency converter
Weight1.4 kg
Output Current7.5 A
Nominal Output Power1.5 kW2 Hp
TypeFrequency converter
Weight1.7 kg

The ABB Frequency converter with 9.8 A, 2.2 kW 3 Hp, 1.8 kg

TypeFrequency converter

Frequency inverter ABB ACS150-01U-04A7-2 with 0 to 1800 sec, 0-500Hz

The frequency converter ACS150-03E-01A9-4 0.55 kW0.75 Hp, 1.9 A, 1.2 kg

Output Current2.4 A
Nominal Output Power0.37 kW0.5 Hp
TypeFrequency converter
Weight1.2 kg

Frequency converter ACS150-03E-02A4-4 0.75 kW1.0 Hp, 2.4 A, 1.2 kg

Frequency drive acs150 03e 05a6 4 2.2 kW3 Hp, 5.6 A, 1.3 kg

Frequency converters ACS150-03E-07A3-4 7.3 A, 3 kW3 Hp, 1.4 kg

Output Current7.5 A
Nominal Output Power1.5 kW2 Hp
TypeFrequency converter
Weight1.7 kg
TypeFrequency converter
TypeFrequency converter
Output Current2.4 A
Nominal Output Power0.37 kW0.5 Hp
TypeFrequency converter
Weight1.2 kg
Weight0.001 kg
TypeFrequency converter

The ACS150 series with 0-500Hz, 16 kHz

Frequency converters 0.37 kW0.5 Hp, 1.2 A, 1.2 kg

Output Current3.3 A
Nominal Output Power1.1 kW1.5 Hp
TypeFrequency converter
Weight1.3 kg
Output Current4.1 A
Nominal Output Power1.5 kW2 Hp
TypeFrequency converter
Weight1.3 kg
Output Current4.7 A
Nominal Output Power0.75 kW1 Hp
TypeFrequency converter
Weight1.4 kg

Frequency converter ACS150-03E-08A8-4 8.8 A, 4 kW5 Hp, 1.4 kg

Frequency converter ACS150-03E-09A8-2 68582059, 9.8 A, 2.2 kW3 Hp

ACS150-03U-02A4-4  Micro Drive 0.37 - 4 kW with IP20

TypeFrequency converter
TypeFrequency converter

Frequency converter 3 Phases, 5.6, 3 HP

TypeFrequency converter

acs 150

Frequency Component Micro Drives ABB ACS150 belong to the low-voltage drives of alternating current. The main sphere of their application is simple production mechanisms, such as conveyers, mixers, pumps, ventilators, and also many other devices in which application of asynchronous engines is needed.

These drives differ by wide spectrum of powers and ease of use. They also have large spectrum of internal functions.
The range of ABB drives series is offered in the categories of single-phase and three-phase voltage power connection. Additional equipment such as FlashDrop tool includes in the set. It gives the opportunity of loading information into drive without power supply.

Benefits of ACS150 drives:

  • brake chopper (built-in);
  • the power range 0,37 … 4 kW;
  • PID control;
  • built-in electromagnetic comparableness filter(EMC);
  • built-in potentiometer;
  • regulates frequency of rotation;
  • user interface (integrated).

ACS150-01E Micro Drives (1-phase input)

ACS150-01e is line of ABB micro drives. It is intended for control of low-voltage asynchronous electric motors (AC) in simple applications, not requiring accurate control of the moment, speed or some external process variable, but allowing for work with different types of load. They have one phase and power from 200 to 240 V, frequency 50Hz and EMC Filter.

ACS150-01E frequency converter is applicable in such fields as pumps, ventilators, gates control, processing of metals, conveyers and etc.

The main features and advantages of ACS150 01E:

  • The possibility of purchase within the actuators through a large number of distributors. Rapid and reliable delivery is thus provided with good technical support in any country of the world.
  • Inbuilt control panel and potentiometer. Advantage of this property is an economy of time.
  • Wide opportunities for installation. The same drive can be used in different projects with diminishing of expenses on setting and installation time.
  • PID regulation gives enhanceable indexes on the output of drive, stability and accuracy.
  • EMC filter provides low EMC radiation in all environments.
  • Brake chopper as standard provides the economy of place and diminishing of expenses on setting of equipment.
  • Possibility of the use of Flashdrop for putting into an operation. It is a rapid, safe and practically faultless method of tuning of parameters of drive, does not require power supply. It is patented.
  • Varnish covered Boards reduce the amount of works on service due to good defense of electronic components

ACS150-01U Micro Drives (1-phase input)

Component drives of ABB ACS150 answer the requirements of clients, producers of machinery and manufacturers of panel equipment. ACS150-01U drives can be purchased from most distributors of ABB equipment. Component drives are simple in a selection and possess the wide range of intrinsic functions in standard execution such as PID- regulation, inbuilt brake chopper, built-in control panel and potentiometer for adjusting of speed.

ACS150-01U are produced with one phase, power 200 .. 240V and 60 Hz. They don’t have EMC Filter.

Acs150 01U allows improving adjusting of motor speed in most applications:
  • In mixers drives provide a high starting torque which improves the start of mixer.
  • In conveyors speed of strap can be regulated by the drive of control engine.
  • Heat-pump consists of evaporator with heat exchanger, compressor and condenser with heat exchanger and are devices for the transfer thermal energy from the source to the consumer. The transmission of heat is produced by working fluid – refrigerant, circulating in the internal loop. The system works as a caldron at heating and as a conditioner at cooling.
  • Fans are used for ventilation and cooling in commercial, industrial and dwellings buildings.

ACS150-03E Micro Drives (3-phase input)

ABB ACS150-03E drives have inbuilt EMS Filter, three phases, frequency 50Hz. This frequency converter series is produced for two voltage ranges: 200 - 240 V, 380 - 480 V.

This type has a lot of build-in features:  control panel, potentiometer, brake chopper, board with an additional protective varnish.

Another benefit of ACS150-03E is simplicity in mounting owing to small sizes and many variants of assembling.

Applications of ACS150 03E:

  1. Mixers. After the start of drive with a high torque the noiseless control mode enlarges the frequency of switching keys inverter, resulting in reduced the drive noise.  The device of Flashdrop allows carrying out rapid and safe configuration of multiple identical drives for identical mixer applications.
  2. Conveyors. Lines of production usually consist of a few successive conveyors which need to be efficiently linked to each other to ensure high production output. Drives allow to implement the smooth start and stop of the conveyor, while decreasing mechanical wear and reducing maintenance costs.
  3. Heat pumps. Heat pumps equipped with the control system and automation, which supports a given mode of operation of the heat pump. Drives allow an user to regulate power of heating or cooling due to adjusting of the productivity of circulation pumps in a primary and secondary circuit loop. AC drives ptimizes energy efficiency and smooth system operations.
  4. - Fans. Using a drive to regulate the flow of air, it is possible to implement the economy of electric power depending on the method of mechanical management a stream. The ABB drives have the built-in PID- regulator which optimizes airflow by adjusting the fan speed depending on the magnitude of the task. A miniaturized size and various variants of mounting allow to get the flexible system design.

ACS150-03U Micro Drives (3-phase input)

ABB ACS150-03U frequency converters was disigned for such applications as ventilators, mixers, conveyers or pumps. These compact drives are simple in a selection and possess the wide range of intrinsic functions in standard execution: PID-regulator, brake module, control panel, potentiometer (for speed control), input/output chokes and FlashDrop Device.

Their main characteristics are:  three phases with power 200 .. 240 V, three phases with power 380 .. 480 V, Frequency 60 Hz.

Advantages of ACS150 03U:
  • Drives are widely widespread. They have excellent global network of service and support, which  is one of the largest in industry.
  • Clear the alphanumeric display which is simple in tuning and exploitation.
  • High electromagnetic compatibility of the drive.
  • There is no need to use an external brake chopper.
  • Assembling on DIN rail or by screw-bolts, the lateral mounting or mounting side-oh-side.
  • Speed-up and simplified tuning and putting into an operation. It is important for a mass production and technical service. Flashdrop can load parameters in the de-energized drive, a device also can copy parameters from one drive in other and to unload parameters in PC.
  • Regulates the productivity of drive in accordance with the requirements of technological process.
  • Coverage varnish allows to protect electronics from harmful influences, including static  electricity and admixtures, contained in mid air, including from condensation.
  • ACS150-01E-02A4-2 68581940
  • ACS150-01E-04A7-2 68581966
  • ACS150-01E-06A7-2 68581974
  • ACS150-01E-07A5-2 68581982
  • ACS150-01E-09A8-2 68581991
  • ACS150-01U-02A4-2 68582156
  • ACS150-01U-04A7-2 68582172
  • ACS150-01U-06A7-2 68582181
  • ACS150-01U-07A5-2 68582199
  • ACS150-01U-09A8-2 68582211
  • ACS150-03E-01A2-4 68581737
  • ACS150-03E-01A9-4 68581745
  • ACS150-03E-02A4-2 68582008
  • ACS150-03E-02A4-4 68581753
  • ACS150-03E-03A3-4 68581761
  • ACS150-03E-03A5-2 68582016
  • ACS150-03E-04A1-4 68581788
  • ACS150-03E-04A7-2 68582024
  • ACS150-03E-05A6-4 68581796
  • ACS150-03E-06A7-2 68582032
  • ACS150-03E-07A3-4 68581800
  • ACS150-03E-07A5-2 68582041
  • ACS150-03E-08A8-4 68581818
  • ACS150-03E-09A8-2 68582059
  • ACS150-03U-01A2-4 68582075
  • ACS150-03U-01A9-4 68582083
  • ACS150-03U-02A4-2 68582237
  • ACS150-03U-02A4-4 68582091
  • ACS150-03U-03A3-4 68582105
  • ACS150-03U-03A5-2 68582245
  • ACS150-03U-04A1-4 68582113
  • ACS150-03U-04A7-2 68582253
  • ACS150-03U-05A6-4 68582121
  • ACS150-03U-06A7-2 68582261
  • ACS150-03U-07A5-2 68582270
  • ACS150-03U-08A8-4 68582148
  • ACS150-03U-09A8-2 68582288
  • ACS150/350-PROGCASE 3AUA0000012080