Baumer EIL580-SC - optoPulse
encoder with clamping flange
Solid shaft encoder with clamping flange
| Voltage supply | 5 VDC ±5 % 8...30 VDC 4.75...30 VDC |
| Reverse polarity protection | Yes |
| Short-circuit proof | Yes (HTL) Yes (TTL, max. 1 s and 1 signal) |
| Operating temperature | -40...+85 °C |
Item Number:
EIL580-SC - optoPulse
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
Solid shaft encoder with clamping flange, 58 mm precise optical
| Operating temperature | -40...+85 °C |
| Output frequency | ≤300 kHz (TTL) ≤160 kHz (HTL) |
| Sensing method | Optical |
| Relative humidity | 90 % non-condensing |
| Pulses per revolution | 100...5000 |
| Admitted shaft load | ≤40 N axial ≤80 N radial |
| manufacter SKU | EIL580-SC - clamping flange |
| Connection | Flange connector M12, 8-pin Flange connector M23, 12-pin Cable |
| Emitted interference | DIN EN 61000-6-3 |
| Output stages | TTL/RS422 HTL/push-pull |
| Reference signal | Zero pulse, width 90° ±10 % |
| Scan ratio | 40...60 % |
| Size (flange) | ø58 mm |
| Phase shift | 90° ±10° |
| Approval | UL 508 / CSA 22.2 |
| Interference immunity | DIN EN 61000-6-2 |
| EIL580-SC - clamping flange output signals | A+, B+, R+, A-, B-, R- |
| Resistance | DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 300 g, 6 ms |
| Starting torque | ≤0.015 Nm (+20 °C, IP 65) ≤0.02 Nm (+20 °C, IP 67) |
| Operating speed | ≤6000 rpm (+20 °C, IP 67) ≤12000 rpm (+20 °C, IP 65) |
| Weight approx. | 300 g |
| Shaft type | ø10 x 20 mm, solid shaft with flat (clamping flange) ø9.525 mm (3/8") x 20 mm, solid shaft with flat |
| Materials | Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel |
| Protection DIN EN 60529 | IP 65 (without shaft seal) IP 67 (with shaft seal) |
| Reverse polarity protection | Yes |
| Short-circuit proof | Yes (HTL) Yes (TTL, max. 1 s and 1 signal) |
| Voltage supply | 5 VDC ±5 % 8...30 VDC 4.75...30 VDC |
| Consumption w/o load | ≤70 mA |
Comments
No comments yet