Baumer EIL580-T - through hollow shaft
Incremental encoders

Baumer EIL580-T - through hollow shaft
Voltage supply5 VDC ±5 %
8...30 VDC
4.75...30 VDC
Reverse polarity protectionYes
Short-circuit proofYes (HTL)
Yes (TTL, max. 1 s and 1 signal)
Operating temperature-40...+85 °C
Item Number: EIL580-T - through hollow shaft
261.10
-
+
Total price: 261.10
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Weight approx. 300 g
Phase shift 90° ±10°
Resistance DIN EN 60068-2-6
Vibration 30 g, 10-2000 Hz
DIN EN 60068-2-27
Shock 250 g, 6 ms
manufacter SKUEIL580-T - through hollow shaft
Scan ratio 40...60 %
Connection Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable
Emitted interference DIN EN 61000-6-3
Size (flange) ø58 mm
Pulses per revolution 100...5000
Starting torque ≤0.02 Nm (+20 °C, IP 65)
≤0.025 Nm (+20 °C, IP 67)
Reverse polarity protection Yes
Short-circuit proof Yes (HTL)
Yes (TTL, max. 1 s and 1 signal)
Approval UL 508 / CSA 22.2
Operating speed ≤3000 rpm (+20 °C, IP 67)
≤6000 rpm (+20 °C, IP 65)
Protection DIN EN 60529 IP 65 (without shaft seal)
IP 67 (with shaft seal)
Voltage supply 5 VDC ±5 %
8...30 VDC
4.75...30 VDC
EIL580-T - through hollow shaft output signals A+, B+, R+, A-, B-, R-
Relative humidity 90 % non-condensing
Reference signal Zero pulse, width 90° ±10 %
Consumption w/o load ≤70 mA
Output stages TTL/RS422
HTL/push-pull
Output frequency ≤300 kHz (TTL)
≤160 kHz (HTL)
Interference immunity DIN EN 61000-6-2
Shaft type ø8...15 mm (through hollow shaft)
Materials Housing: aluminium die-cast
Flange: aluminium
Operating temperature -40...+85 °C
Motor shaft tolerance 0.2 mm axial
0.03 mm radial
Sensing method Optical

Comments

No comments yet

Write a comment