Baumer EIL580P-SQ10 - Square flange
Incremental encoders

Baumer EIL580P-SQ10 - Square flange
Voltage supply4.75...30 VDC
Reverse polarity protectionYes
Short-circuit proofYes
Operating temperature-40...+100 °C
Item Number: EIL580P-SQ10 - Square flange
376.03
-
+
Total price: 376.03
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
Protection DIN EN 60529 IP 65 (without shaft seal)
IP 67 (with shaft seal)
Scan ratio 45...55 % typical at 2048 ppr
Reference signal Zero pulse 90° or 180°
Operating temperature -40...+100 °C
Voltage supply 4.75...30 VDC
Approval UL 508 / CSA 22.2
Admitted shaft load ≤40 N axial
≤80 N radial
Emitted interference DIN EN 61000-6-3
Output frequency ≤300 kHz (TTL)
≤160 kHz (HTL)
Interference immunity DIN EN 61000-6-2
Short-circuit proof Yes
Connection Flange connector M12, 8-pin
Flange connector M23, 12-pin
Cable
Output stages TTL/RS422
HTL/push-pull
Consumption w/o load ≤70 mA
Materials Housing: aluminium die-cast
Flange: aluminium
Solid shaft: stainless steel
EIL580P-SQ10 - Square flange output signals A+, B+, R+, A-, B-, R-
Size (flange) 63.5 x 63.5 mm
Operating speed ≤6000 rpm (+20 °C, IP 67)
≤12000 rpm (+20 °C, IP 65)
Starting torque ≤0.015 Nm (+20 °C, IP 65)
≤0.02 Nm (+20 °C, IP 67)
Sensing method Optical
Weight approx. 370 g
Pulses per revolution 1...65536
Relative humidity 90 % non-condensing
manufacter SKUEIL580P-SQ10 - Square flange
Reverse polarity protection Yes
Programmable
parameters
Output level TTL/HTL
Pulse number 1...65536
Zero pulse width 90°/180°
Zero pulse position
Signal sequence
Flange Clamping flange square
63.5 x 63.5 mm
Shaft type ø10 x 20 mm, solid shaft with flat
ø9.525 mm (3/8") x 20 mm, solid shaft with flat
Initializing time ≤30 ms after power on
Resistance DIN EN 60068-2-6
Vibration 30 g, 10-2000 Hz
DIN EN 60068-2-27
Shock 300 g, 6 ms

Comments

No comments yet

Write a comment