Baumer FLDM 170G1011/S42
Copy counters
art. 10153175
| measuring distance Sd | 0 ... 90 mm |
| optimum operating distance | 70 mm |
| counting rate | < 3000000 copies/h |
| operating temperature | 0 ... +50 °C |
Item Number:
FLDM 170G1011/S42
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| front (optics) | glass |
| width / diameter | 30 mm |
| protection class | IP 54 |
| counting rate | < 3000000 copies/h |
| measuring distance Sd | 0 ... 90 mm |
| laser class | 2 |
| current consumption max. (no load) | 230 mA |
| sync. input | yes |
| light source | pulsed red laser diode |
| reverse polarity protection | yes |
| sensitivity adjustment | 4 preset levels or level set by customer |
| object cycle distance | > 1 mm |
| object speed | < 5 m/sec |
| manufacter SKU | FLDM 170G1011/S42 |
| output pulse length | 0,3 ... 100 ms selectable |
| edge indicator | LED yellow |
| interface | serial for ScaDiag software |
| housing material | die-cast zinc |
| connector base (main connector) | DIN 45322, 6 pin |
| measuring point | visible red laser line 6 mm |
| wave length | 670 nm |
| type | rectangular |
| power on indication | LED green |
| voltage supply range +Vs | 10 ... 30 VDC |
| sensitivity | single sheet/edge thickness 0,1 mm |
| operating temperature | 0 ... +50 °C |
| direct gap detection | yes |
| connector base (interface) | DIN 45326, 8 pin |
| optimum operating distance | 70 mm |
| output circuit | push-pull |
| false pulse suppression | 4 program options |
| short circuit protection | yes |
Comments
No comments yet