Baumer GE244
Absolute encoders
Voltage supply | 10...30 VDC |
Reverse polarity protection | Yes |
Consumption w/o load | ≤50 mA (24 VDC) |
Operating temperature | -25...+85 °C -40...+85 °C (optional) |
Inputs | SSI clock Control signals UP/DOWN and zero |
- Overview
- Comments
Flange | Clamping flange |
Weight approx. | 600 g |
Interference immunity | DIN EN 61000-6-2 |
Connection | Connector M23, 12-pin |
Code | Gray or binary |
Function | Singleturn |
Output stages | SSI data: linedriver RS485 Diagnostic outputs push-pull Incremental: push-pull or linedriver RS422 |
Resistance | DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms |
Incremental output | 2048 pulses A90°B + inverted |
Emitted interference | DIN EN 61000-6-4 |
Sensing method | Optical |
Steps per turn | ≤16384 / 14 bit |
Interfaces | SSI Incremental A 90° B (optional) |
Initializing time typ. | 20 ms after power on |
Admitted shaft load | ≤20 N axial ≤40 N radial |
Inputs | SSI clock Control signals UP/DOWN and zero |
Materials | Housing: stainless steel 1.4305 or 1.4404 Flange: stainless steel 1.4305 or 1.4404 |
Code sequence | CW/CCW coded by connection |
Rotor moment of inertia | 14.5 gcm² |
Operating temperature | -25...+85 °C -40...+85 °C (optional) |
Operating speed | ≤10000 rpm (mechanical) ≤6000 rpm (electric) |
Diagnostic function | Self-diagnosis |
Relative humidity | 95 % non-condensing |
Shaft type | ø10 mm solid shaft |
Approval | UL approval / E63076 |
Size (flange) | ø58 mm |
manufacter SKU | GE244 |
Starting torque | ≤0.03 Nm |
Voltage supply | 10...30 VDC |
Consumption w/o load | ≤50 mA (24 VDC) |
Reverse polarity protection | Yes |
Absolute accuracy | ±0.025 ° |
Protection DIN EN 60529 | IP 67 |
People also buy
Comments
No comments yet