Pepperl+Fuchs NBB10-30GM50-E2-C3-V1
Inductive sensor
- 10 mm flush
- Weld Immune
- Ceramic coated sensing face
- Overview
- Comments
Connection type | Connector plug M12 x 1 , 4-pin |
Reduction factor rCu | 0.2 |
Switching frequency | 0 ... 10 Hz |
Assured operating distance | 0 ... 8.1 mm |
Installation | flush |
Switching function | Normally open (NO) |
Sensing face | Ceramic coated |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Operating voltage indicator | LED, green |
Short-circuit protection | pulsing |
No-load supply current | 15 mA |
Alternating magnetic field | 150 mT |
Operating current | 0 ... 200 mA |
MTTFd | 1835 a |
Mission Time (TM) | 20 a |
Switching state indicator | LED, yellow |
Output type | PNP |
Hysteresis | typ. 5 % |
CSA approval | cCSAus Listed, General Purpose |
UL approval | cULus Listed, General Purpose |
Constant magnetic field | 150 mT |
Voltage drop | 3 V |
Degree of protection | IP67 |
Diagnostic Coverage (DC) | 0 % |
Reduction factor rAl | 0.3 |
Housing material | Brass, PTFE coated |
Reverse polarity protection | reverse polarity protected |
Output polarity | DC |
Reduction factor r304 | 0.6 |
Output type | 3-wire |
Rated operating distance | 10 mm |
Operating voltage | 10 ... 30 V DC |
CCC approval | CCC approval / marking not required for products rated 36 V |
Off-state current | 0 ... 0.5 mA typ. 0.1 andmicro;A at 25 В°C |
People also buy
Comments
No comments yet