Pepperl+Fuchs NBB10-30GM50-WS-V12
Inductive sensor
- Basic series
- 10 mm flush
- 2-wire AC
- Overview
- Comments
Rated operating distance | 10 mm |
Hysteresis | typ. 5 % |
Note | 1) In the temperature range below 0 В°C, permissible operating voltage Ub 80...253 V Safety fuse ≤ 0.3 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
Switching frequency | 0 ... 20 Hz |
Voltage drop | < 5 V (IL > 50 mA); < 8 V (IL < 50 mA) |
Housing material | brass, nickel-plated |
Reduction factor rAl | 0.33 |
Switching state indicator | LED, yellow |
Operating current | 5 ... 200 mA |
Switching function | Normally open (NO) |
Operating voltage | 20 ... 253 V |
UL approval | cULus Listed, General Purpose |
Output polarity | AC |
CCC approval | Certified by China Compulsory Certification (CCC) |
Output type | Two-wire |
Operating voltage indicator | LED, green |
CSA approval | cCSAus Listed, General Purpose |
Installation | flush |
Momentary current (20 ms, 0.1 Hz) | 0 ... 1600 mA |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Degree of protection | IP67 |
Off-state current | 0 ... 1.7 mA |
Reverse polarity protection | reverse polarity tolerant |
Reduction factor r304 | 0.81 |
Actual operating distance | 9 ... 11 mm |
Assured operating distance | 0 ... 8.1 mm |
Reduction factor rCu | 0.28 |
Housing diameter | 30 mm |
Connection type | Connector 1/2""-20 UN , 3-pin |
Sensing face | PBT |
People also buy
Comments
No comments yet