Pepperl+Fuchs NBN15-30GM50-E2-5M
Inductive sensor
- 5 m cable length
- Overview
- Comments
No-load supply current | 15 mA |
Switching frequency | 0 ... 200 Hz |
Switching function | Normally open (NO) |
Operating current | 0 ... 200 mA |
MTTFd | 1803 a |
Sensing face | PBT |
Core cross-section | 0.34 mm2 |
CCC approval | CCC approval / marking not required for products rated 36 V |
Installation | non-flush |
Operating voltage | 10 ... 30 V |
Switching state indicator | all direction LED, yellow |
Mission Time (TM) | 20 a |
Connection type | cable PVC , 5 m |
Rated operating distance | 15 mm |
Output polarity | DC |
Reduction factor rCu | 0.4 |
Diagnostic Coverage (DC) | 0 % |
Reduction factor r304 | 0.8 |
Assured operating distance | 0 ... 12.15 mm |
Reduction factor rAl | 0.5 |
UL approval | cULus Listed, General Purpose |
Off-state current | 0 ... 0.5 mA typ. 0.1 andmicro;A at 25 В°C |
Short-circuit protection | pulsing |
Hysteresis | typ. 5% |
Housing material | brass, nickel-plated |
CSA approval | cCSAus Listed, General Purpose |
Voltage drop | 3 V |
Housing diameter | 30 mm |
Reverse polarity protection | reverse polarity protected |
Degree of protection | IP67 |
Output type | PNP |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
People also buy
Comments
No comments yet