Pepperl+Fuchs NBN3-F25F-E8-Y41365
Inductive sensor
- For installation in housing
- Direct mounting on standard actuators
- Overview
- Comments
Rated operating distance | 3 mm |
Hysteresis | typ. 5 % |
Reduction factor r304 | 1 |
Output type | 3-wire |
Degree of protection | IP20 |
Note | Please use Phönix FK-MCP 1,5/4-ST-3,81 connector |
Voltage drop | ≤ 3 V |
Operating voltage indicator | LED, green |
CSA approval | cCSAus Listed, General Purpose |
Reduction factor rAl | 0.5 |
UL approval | cULus Listed, General Purpose |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Operating current | 0 ... 200 mA |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Installation | non-flush |
Reverse polarity protection | reverse polarity protected |
Connection type | MINI-COMBICON |
Sensing face | PBT |
Output type | PNP |
Housing material | PBT |
Tightening torque, fastening screws | M5 x 25 : 2.7 Nm |
Operating voltage | 10 ... 30 V |
Switching frequency | 0 ... 500 Hz |
Short-circuit protection | pulsing |
Switching state indicator | LED, yellow |
Assured operating distance | 0 ... 2.43 mm |
Reduction factor rCu | 0.4 |
Output polarity | DC |
Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 В°C |
Time delay before availability | ≤ 500 ms |
Storage temperature | -40 ... 85 В°C (-40 ... 185 В°F) |
Switching function | 2 x normally open (NO) |
No-load supply current | ≤ 25 mA |
Actual operating distance | 2.7 ... 3.3 mm typ. |
People also buy
Comments
No comments yet