Pepperl+Fuchs NBN3-F31-E8-V1
Inductive sensor
- Overview
- Comments
Sensing facePBT
Direct mounting on standard actuators
Fixed setting
Off-state current | 0 ... 0.5 mA typ. 0.1 µA at 25 В°C |
Connection (system side) | 4-pin, M12 x 1 connector |
Hysteresis | typ. 5 % |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Reduction factor rSt37 | 1.2 |
Reduction factor rAl | 0.5 |
Reduction factor rCu | 0.4 |
Operating voltage indicator | LED, green |
CSA approval | cCSAus Listed, General Purpose |
Output polarity | DC |
Switching frequency | 0 ... 500 Hz |
MTTFd | 780 a |
Voltage drop | ≤ 3 V |
Housing material | PBT |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
Diagnostic Coverage (DC) | 0 % |
UL approval | cULus Listed, General Purpose |
Mission Time (TM) | 20 a |
Actual operating distance | 2.7 ... 3.3 mm typ. |
Switching state indicator | LED, yellow |
Output type | PNP |
Operating current | 0 ... 100 mA |
Degree of protection | IP67 |
Short-circuit protection | pulsing |
Output type | 3-wire |
Operating voltage | 10 ... 30 V DC |
Switching function | 2 x normally open (NO) |
Reduction factor r304 | 1 |
Assured operating distance | 0 ... 2.43 mm |
EAC conformity | TR CU 020/2011 |
Reverse polarity protection | all connections |
No-load supply current | ≤ 25 mA |
Rated operating distance | 3 mm |
Connector housing | metal |
Installation | flush mountable |
Comments
No comments yet