Pepperl+Fuchs NCB2-V3-N0-Y244943
Inductive sensor
- 2 mm flush
- Usable up to SIL 2 acc. to IEC 61508
- Overview
- Comments
| Appropriate type | NCB2-V3-N0... |
| Core cross-section | 0.14 mm2 |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| Effective internal inductance | max. 100 µH |
| Assured operating distance | 0 ... 1.62 mm |
| Appropriate type | NCB2-V3-N0... |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. |
| Hysteresis | typ. 3 % |
| Switching function | Normally closed (NC) |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| Effective internal capacitance | max. 100 nF |
| Output type | 2-wire |
| Effective internal inductance | max. 100 µH |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. Note: Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already been applied to the temperature table for category 1. |
| Switching frequency | 0 ... 2000 Hz |
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| Effective internal capacitance | max. 100 nF |
| Installation | flush |
| Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
| CE marking | [*PD-Z02585A*] |
| Diagnostic Coverage (DC) | 0 % |
| CSA approval | cCSAus Listed, General Purpose |
| MTTFd | 2180 a |
| Mission Time (TM) | 20 a |
| CE marking | [*PD-Z02585A*] |
| Reduction factor rCu | 0.2 |
| Reduction factor rAl | 0.3 |
| Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| Use in the hazardous area | see instruction manuals |
| Housing material | PBT |
| Effective internal inductance | max. 100 µH |
| Rated operating distance | 2 mm |
| Output type | NAMUR |
| Sensing face | PBT |
| Connection type | cable PVC , 130 mm Insulated wire end ferrule with 8 mm pin length |
| Effective internal capacitance | max. 100 nF |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| Degree of protection | IP67 |
| CE marking | [*PD-Z02585A*] |
| Switching state indicator | LED, yellow |
| Reduction factor r304 | 0.7 |
| Appropriate type | NCB2-V3-N0... |
Comments
No comments yet