Pepperl+Fuchs NCN50-FP-W-P1
Inductive sensor
Series: Rectangular type, Housing material: PBT, Rated operating distance: 50 mm, Switching element function: AC Make/Break function, Connection type: terminal compartment, Output type: 2-wire, Installation: not embeddable, Kind of voltage: AC
Item Number:
NCN50-FP-W-P1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
General specifications | ||
Switching element function | AC | |
Rated operating distance | 50 mm | |
Installation | non-flush | |
Output polarity | AC | |
Assured operating distance | 0 ... 40.5 mm | |
Reduction factor rAl | 0.4 | |
Reduction factor rCu | 0.3 | |
Reduction factor r304 | 0.85 | |
Nominal ratings | ||
Operating voltage | 20 ... 253 V | |
Switching frequency | 0 ... 20 Hz | |
Hysteresis | typ. 3 % | |
Short-circuit protection | no | |
Voltage drop | less than or equal to 5 V typ. 4V | |
Momentary current (20 ms, 0.1 Hz) | max. 4000 mA | |
Operating current | 5 ... 500 mA | |
Off-state current | 0.3 ... 1 mA typ. 0.7 mA | |
Operating voltage indicator | LED, green | |
Switching state indicator | LED, yellow | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Mechanical specifications | ||
Core cross-section | up to 2.5 mm2 | |
Housing material | PBT | |
Sensing face | PBT | |
Degree of protection | IP68 | |
Note | 1) In the temperature range below 0 °C, permissible operating voltage Ub 80...253 V Safety fuse less than or equal to 2 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
People also buy
Comments
No comments yet