Pepperl+Fuchs NJ2-11-N-G-V1-Y194329
Inductive sensor
- Comfort series
- Overview
- Comments
Appropriate type | NJ 2-11-N-G... |
Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
Effective internal capacitance | max. 30 nF ; a cable length of 10 m is considered. |
Actual operating distance | 1.8 ... 2.2 mm |
CE marking | [*PD-Z02585A*] |
Housing material | Stainless steel 1.4305 / AISI 303 |
ATEX marking | II 1D Ex ia IIIC T135В°C Da The Ex-related marking can also be printed on the enclosed label. |
Reduction factor r304 | 0.85 |
Hysteresis | 0.5 ... 3.5 typ. 2 % |
Appropriate type | NJ 2-11-N-G... |
Degree of protection | IP68 |
Reduction factor rCu | 0.3 |
Diagnostic Coverage (DC) | 0 % |
Ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. Note: Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already been applied to the temperature table for category 1. |
Mission Time (TM) | 20 a |
Effective internal capacitance | max. 30 nF ; a cable length of 10 m is considered. |
Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
Effective internal inductance | max. 50 µH ; a cable length of 10 m is considered. |
Installation | flush |
Effective internal inductance | max. 50 µH ; a cable length of 10 m is considered. |
Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
ATEX marking | II 1G Ex ia IIC T6…T1 Ga The Ex-related marking can also be printed on the enclosed label. |
MTTFd | 5887 a |
Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EC-type examination certificate. |
Use in the hazardous area | see instruction manuals |
CE marking | [*PD-Z02585A*] |
Switching frequency | 0 ... 3000 Hz |
Output type | NAMUR |
Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the surface temperature, and the effective internal reactance values can be found on the EC-type-examination certificate. The maximum permissible ambient temperature of the data sheet must be noted, in addition, the lower of the two values must be maintained. |
Sensing face | PVDF |
Appropriate type | NJ 2-11-N-G... |
Standards | EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
Assured operating distance | 0 ... 1.62 mm |
ATEX marking | II 1G Ex ia IIC T6…T1 Ga The Ex-significant identification is on the enclosed adhesive label |
Switching function | Normally closed (NC) |
Nominal voltage | 8 V |
Effective internal capacitance | max. 30 nF ; a cable length of 10 m is considered. |
CE marking | [*PD-Z02585A*] |
Effective internal inductance | max. 50 µH ; a cable length of 10 m is considered. |
Connection type | Connector plug M12 x 1 , 4-pin |
Reduction factor rAl | 0.4 |
Rated operating distance | 2 mm |
Output type | 2-wire |
People also buy
Comments
No comments yet