Pepperl+Fuchs NJ2-12GM50-WO
Inductive sensor

Pepperl+Fuchs NJ2-12GM50-WO
Series: Cylindrical type, Housing diameter: 12 mm, Housing material: Stainless steel 1.4305 / AISI 303, Rated operating distance: 2 mm, Connection type: cable PVC , 2 m, Output type: 2-wire, Installation: flush, Type of voltage: AC
Item Number: NJ2-12GM50-WO
Price on Request
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Comments
General specifications
Switching element functionAC NC
Rated operating distance2 mm
Installationflush
Output polarityAC
Assured operating distance0 ... 1.62 mm
Reduction factor rAl 0.1
Reduction factor rCu 0.1
Reduction factor r304 0.6
Nominal ratings
Operating voltage20 ... 253 V
Switching frequency0 ... 20 Hz
Reverse polarity protectionreverse polarity tolerant
Voltage droptyp. 4 V at 15 ... 200 mA
typ. 6.5 V at 5 mA
Momentary current
(20 ms, 0.1 Hz)
0 ... 1200 mA
Operating current5 ... 200 mA
Off-state currenttyp. 0.7 mA
Switching state indicatorLED, yellow
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCertified by China Compulsory Certification (CCC)
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typecable PVC , 2 m
Core cross-section0.34 mm2
Housing materialStainless steel 1.4305 / AISI 303
Sensing facePBT
Housing diameter12 mm
Degree of protectionIP67
Note1) In the temperature range below 0 °C, permissible operating voltage Ub 80...253 V
Safety fuse less than or equal to 2 A (quick-blow) according to IEC 60127-2 Sheet 1
Recommendation: after a short circuit, check that the device is functioning correctly.
General information
Scope of delivery2 self locking nuts in scope of delivery

Comments

No comments yet

Write a comment