Pepperl+Fuchs NJ2-FD-E02-1.875-V1
Inductive sensor
- 4-wire DC
- Weld Immune
- Sensing range 2 mm
- 5000 psi rating
- Overview
- Comments
| Assured operating distance | 0 ... 1.62 mm |
| Mag. Field strength, DC fields | 100 mT |
| Short-circuit protection | yes |
| Switching function | Normally open (NO) |
| Material | Housing: zinc Probe: stainless steel |
| Hysteresis | 10 ... 20 typ. 15 % |
| No-load supply current | 35 mA |
| Operating current | 200 mA |
| Installation | flush |
| CSA approval | cCSAus Listed, General Purpose |
| Standards | EN 60947-5-2 |
| Operating pressure dynamically | 5000 psi |
| Reduction factor r304 | 0.85 |
| Switching frequency | 0 ... 30 Hz |
| Voltage drop | 2 V DC |
| Reduction factor rAl | 0.4 |
| Note | X = 1.875 in (47.6 mm) |
| Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
| Mag. Field strength, AC fields | 250 mT |
| Reverse polarity protection | yes |
| Operating voltage | 10 ... 30 V DC |
| UL approval | cULus Listed, General Purpose |
| Output type | PNP/NPN |
| LED yellow | Output status |
| Output polarity | DC |
| LED green | Power on |
| Degree of protection | IP67 |
| Rated operating distance | 2 mm |
| Off-state current | 100 andmicro;A |
Comments
No comments yet