Pepperl+Fuchs NJ2-FD1-E2-1.875-V1-T
Inductive sensor
- 3-wire DC
- Weld Immune
- Sensing range 2 mm
- 5000 psi rating
- High temperature model
- Overview
- Comments
Reduction factor rAl | 0.4 |
Assured operating distance | 0 ... 1.62 mm |
No-load supply current | 35 mA |
Voltage drop | 2 V |
Mag. Field strength, DC fields | 100 mT |
Output polarity | DC |
Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) on probe -25 ... 85 В°C (-13 ... 185 В°F) on sensor |
Off-state current | < 100 andmicro;A |
Switching frequency | 250 Hz |
Reduction factor r304 | 0.85 |
Switching function | Normally open (NO) |
Rated operating distance | 2 mm |
Mag. Field strength, AC fields | 250 mT |
LED green | Power on |
Standards | EN 60947-5-2 |
Operating pressure dynamically | 5000 psi |
Output type | PNP |
Hysteresis | 10 ... 20 % 15 typ. |
Operating current | 100 mA |
Short-circuit protection | yes |
Installation | flush |
Note | X = 1.875 in (47.6 mm) |
Degree of protection | IP67 |
Operating voltage | 10 ... 30 V DC |
LED yellow | Output status |
Material | Housing: zinc Probe: stainless steel Flange: steel |
CSA approval | cCSAus Listed, General Purpose |
UL approval | cULus Listed, General Purpose |
People also buy
Comments
No comments yet