Pepperl+Fuchs NJ20-40-A2
Inductive sensor
Series: Cylindrical type, Diameter of the housing: 40 mm, Housing material: PBT, Rated operating distance: 20 mm, Switching element function: PNP Antivalent, Connection type: terminal compartment, Output type: 4-wire, Installation: not embeddable, Kind of voltage: DC
- Overview
- Comments
General specifications | ||
Switching element function | PNP | |
Rated operating distance | 20 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 16.2 mm | |
Reduction factor rAl | 0.4 | |
Reduction factor rCu | 0.3 | |
Reduction factor r304 | 0.85 | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V | |
Switching frequency | 0 ... 100 Hz | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | less than or equal to 3 V | |
Operating current | 0 ... 200 mA | |
No-load supply current | less than or equal to 20 mA | |
Switching state indicator | LED, yellow | |
Standard conformity | ||
Standards | IEC / EN 60947-5-2:2004 | |
Ambient conditions | ||
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
Mechanical specifications | ||
Core cross-section | up to 2.5 mm2 | |
Housing material | PBT | |
Sensing face | PBT | |
Housing diameter | 40 mm | |
Degree of protection | IP67 |
People also buy
Comments
No comments yet