Pepperl+Fuchs NJ4-N-H31
Inductive sensor
- Temperature range
0 ... 200 В°C (0 ... 392 В°F) - 4 mm flush
- Overview
- Comments
| Cable length LK | 0,5 / 0,75 / 1 / 2 / 3 / 4 / 6 / 8 / 10 [m] |
| Reduction factor rAl | 0.15 |
| Reduction factor rCu | 0.05 |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Degree of protection | IP65 |
| Note | amplifier -25В°C...70В°C PTFE cable between amplifier and oscillator |
| Output type | 2-wire |
| Core cross-section | 0.34 mm2 |
| Rated operating distance | 4 mm |
| Housing length L | 40 / 50 / 60 / 80 / 100 [mm] |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Reduction factor r304 | 0.55 |
| Nominal voltage | 8 V |
| Sensing face | PPS |
| Output type | NAMUR |
| Switching frequency | 1000 Hz |
| Ambient temperature | 0 ... 200 В°C (32 ... 392 В°F) |
| Assured operating distance | 0 ... 3.04 mm |
| Switching function | Normally closed (NC) |
| Installation | flush |
| Connection type | cable PVC , 10 m |
| Hysteresis | ≤ 20 % at 200В°C |
Comments
No comments yet