Pepperl+Fuchs NJ5-30GK-S1N-15M
Inductive sensor
- Nonferrous targets
- 5 mm flush in ST37 / 1.0037
- Usable up to SIL 3 acc. to IEC 61508
- ATEX approval Ex-i and Ex-nA/tc for zone 0-2 and zone 20-22
- Degree of protection IP68
- Overview
- Comments
| CE marking | [*PD-Z02585A*] |
| Connection type | cable silicone , 15 m |
| Effective internal capacitance | max. 100 nF A cable length of 10 m is considered. |
| Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
| CE marking | [*PD-Z02586A*] |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. using an amplifier in accordance with EN 60947-5-6 : 58 В°C (136.4 В°F) at UBmax = 9 V , RV = 562 andOmega; : 58 В°C (136.4 В°F) |
| MTTFd | 11850 a |
| Equipment protection level | Ga , Gb , Gc (nA) , Da , Dc , Mb |
| Possible characteristics | maximum operating voltage UBmax , maximum load current ILmax , minimum series resistance RV , maximum analog output current IAmax , maximum analog output voltage UAmax |
| Reduction factor r304 | 0 |
| Type of protection | intrinsic safety |
| Safety Integrity Level (SIL) | up to SIL3 acc. to IEC 61508 Danger! In safety-related applications the sensor must be operated with a qualified fail safe interface from Pepperl+Fuchs, such as KFD2-SH-EX1. Consider the ""exida Functional Safety Assessment"" document which is available on www.pepperl-fuchs.com as an integral part of this product's documentation. |
| Assured operating distance | 0 ... 4.05 mm |
| Nominal voltage | 8.2 V |
| Type of protection | ""n"" |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 16 V , Ii = 25 mA , Pi = 34 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 25 mA , Pi = 64 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 52 mA , Pi = 169 mW : 80 В°C (176 В°F) at Ui = 16 V , Ii = 76 mA , Pi = 242 mW : 61 В°C (141.8 В°F) |
| Diagnostic Coverage (DC) | 0 % |
| CE marking | [*PD-Z02586A*] |
| Effective internal capacitance | max. 100 nF A cable length of 10 m is considered. |
| Reduction factor rCu | 1 |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 16 V , Ii = 25 mA , Pi = 34 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 25 mA , Pi = 64 mW : 100 В°C (212 В°F) at Ui = 16 V , Ii = 52 mA , Pi = 169 mW : 80 В°C (176 В°F) at Ui = 16 V , Ii = 76 mA , Pi = 242 mW : 61 В°C (141.8 В°F) |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Switching frequency | 0 ... 150 Hz |
| Effective internal inductance | max. 200 andmicro;H A cable length of 10 m is considered. |
| Housing material | Crastin (PBTB), black |
| Type of protection | intrinsic safety |
| Core cross-section | 0.75 mm2 |
| Output type | NAMUR with safety function |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. at Ui = 16 V , Ii = 25 mA , Pi = 34 mW , T6 : 73 В°C (163.4 В°F) T5 : 88 В°C (190.4 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 16 V , Ii = 25 mA , Pi = 64 mW , T6 : 69 В°C (156.2 В°F) T5 : 84 В°C (183.2 В°F) T4 : 100 В°C (212 В°F) T3 : 100 В°C (212 В°F) T2 : 100 В°C (212 В°F) T1 : 100 В°C (212 В°F) at Ui = 16 V , Ii = 52 mA , Pi = 169 mW , T6 : 51 В°C (123.8 В°F) T5 : 66 В°C (150.8 В°F) T4 : 80 В°C (176 В°F) T3 : 80 В°C (176 В°F) T2 : 80 В°C (176 В°F) T1 : 80 В°C (176 В°F) at Ui = 16 V , Ii = 76 mA , Pi = 242 mW , T6 : 39 В°C (102.2 В°F) T5 : 54 В°C (129.2 В°F) T4 : 61 В°C (141.8 В°F) T3 : 61 В°C (141.8 В°F) T2 : 61 В°C (141.8 В°F) T1 : 61 В°C (141.8 В°F) |
| Type of protection | intrinsic safety |
| Type of protection | intrinsic safety |
| Use in the hazardous area | see instruction manuals |
| Effective internal capacitance | max. 100 nF A cable length of 10 m is considered. |
| Switching function | Normally open (NO) |
| Sensing face | Crastin (PBTB), black |
| CE marking | [*PD-Z02585A*] |
| Effective internal capacitance | max. 100 nF A cable length of 10 m is considered. |
| Output type | 2-wire |
| Installation | flush in mild steel |
| EAC conformity | TR CU 012/2011 |
| Effective internal inductance | max. 200 andmicro;H A cable length of 10 m is considered. |
| Reduction factor rAl | 1 |
| Mission Time (TM) | 20 a |
| Type of protection | Protection by enclosure ""tc"" |
| UL approval | cULus Listed, General Purpose |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. : using an amplifier in accordance with EN 60947-5-6 : 58 В°C (136.4 В°F) at UBmax = 9 V , RV = 562 andOmega; : 58 В°C (136.4 В°F) |
| Possible characteristics | maximum operating voltage UBmax , maximum load current ILmax , minimum series resistance RV , maximum analog output voltage UAmax , maximum analog output current IAmax |
| Safety Integrity Level (SIL) | SIL 3 |
| Rated operating distance | 5 mm |
| Note | only for non-ferrous metal |
| Maximum permissible ambient temperature | Also observe the maximum permissible ambient temperature stated in the general technical data. Keep to the lower of the two values. |
| Effective internal inductance | max. 200 andmicro;H A cable length of 10 m is considered. |
| CE marking | [*PD-Z02585A*] |
| Effective internal inductance | max. 200 andmicro;H A cable length of 10 m is considered. |
| CE marking | [*PD-Z02585A*] |
| Degree of protection | IP68 |
Comments
No comments yet