Pepperl+Fuchs NJ6-22-N-15M
Inductive sensor
- Comfort series
- 6 mm flush
- Usable up to SIL 2 acc. to IEC 61508
- Overview
- Comments
Switching function | Normally closed (NC) |
ATEX marking | II 2G Ex ia IIC T6…T1 Gb The Ex-related marking can also be printed on the enclosed label. |
CSA approval | cCSAus Listed, General Purpose |
Reduction factor rAl | 0.4 |
ATEX marking | II 3G Ex ic IIC T6…T1 Gc The Ex-related marking can also be printed on the enclosed label. |
Hysteresis | 1 ... 7 typ. 4 % |
Housing material | PBT |
Appropriate type | NJ 6-22-N... |
Output type | NAMUR |
Diagnostic Coverage (DC) | 0 % |
UL approval | cULus Listed, General Purpose |
Effective internal inductance | max. 100 µH ; A cable length of 10 m is considered. |
Effective internal capacitance | max. 130 nF ; a cable length of 10 m is considered. |
CE marking | [*PD-Z02586A*] |
Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection category ""ic"" Use is restricted to the following stated conditions |
CE marking | [*PD-Z02585A*] |
CE marking | [*PD-Z02585A*] |
Assured operating distance | 0 ... 4.86 mm |
ATEX marking | II 1D Ex ia IIIC T135В°C Da The Ex-related marking can also be printed on the enclosed label. |
Reduction factor r304 | 0.85 |
Core cross-section | 0.75 mm2 |
Effective internal capacitance | max. 130 µF A cable length of 10 m is considered. |
Degree of protection | IP68 |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Effective internal inductance | max. 100 µH ; a cable length of 10 m is considered. |
Appropriate type | NJ 6-22-N... |
MTTFd | 4566 a |
Switching frequency | 0 ... 2000 Hz |
Effective internal capacitance | max. 130 nF ; a cable length of 10 m is considered. |
Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
Sensing face | PBT |
Reduction factor rCu | 0.3 |
Certificate | PF 13 CERT 2895 X |
Effective internal inductance | max. 100 µH A cable length of 10 m is considered. |
Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate. |
Nominal voltage | 8 V |
Rated operating distance | 6 mm |
Installation | flush |
Output type | 2-wire |
Use in the hazardous area | see instruction manuals |
Connection type | cable PVC , 2 m |
Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
Mission Time (TM) | 20 a |
People also buy
Comments
No comments yet