Pepperl+Fuchs NJ6-22-N-G-15M
Inductive sensor
- Comfort series
- 6 mm flush
- Usable up to SIL 2 acc. to IEC 61508
- Overview
- Comments
| Standards | EN 60079-0:2012+A11:2013, EN 60079-31:2014 Protection by enclosure ""tc"" Some of the information in this instruction manual is more specific than the information provided in the datasheet. |
| CE marking | [*PD-Z02585A*] |
| CE marking | [*PD-Z02586A*] |
| Effective internal inductance | max. 100 µH ; a cable length of 10 m is considered. |
| Use in the hazardous area | see instruction manuals |
| Effective internal capacitance | max. 130 nF ; a cable length of 10 m is considered. |
| Switching function | Normally closed (NC) |
| Core cross-section | 0.75 mm2 |
| Output type | NAMUR |
| Installation | flush |
| Diagnostic Coverage (DC) | 0 % |
| Mission Time (TM) | 20 a |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Effective internal capacitance | max. 130 nF ; a cable length of 10 m is considered. |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| Sensing face | PBT |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| Hysteresis | typ. % |
| UL approval | cULus Listed, General Purpose |
| General | The corresponding datasheets, declarations of conformity, EU type examination certificates, certificates, and control drawings, where applicable (see datasheets), form an integral part of this document. These documents are available at www.pepperl-fuchs.com. The maximum surface temperature of the device was determined without a layer of dust on the apparatus. Some of the information in this instruction manual is more specific than the information provided in the datasheet. |
| Connection type | cable PVC , 15 m |
| Effective internal capacitance | max. 130 µF A cable length of 10 m is considered. |
| Degree of protection | IP68 |
| ATEX marking | The Ex-related marking can also be printed on the enclosed label. |
| Effective internal inductance | max. 100 µH ; A cable length of 10 m is considered. |
| Reduction factor rAl | 0.4 |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| MTTFd | 4566 a |
| Reduction factor r304 | 0.85 |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate. |
| Certificate | PF 13 CERT 2895 X |
| CE marking | [*PD-Z02586A*] |
| Effective internal inductance | max. 100 µH A cable length of 10 m is considered. |
| Rated operating distance | 6 mm |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection ""Intrinsic safety"" Use is restricted to the following stated conditions |
| Reduction factor rCu | 0.3 |
| Appropriate type | NJ 6-22-N... |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Switching frequency | 0 ... 2000 Hz |
| Nominal voltage | 8 V |
| Output type | 2-wire |
| Ambient temperature | -25 ... 100 В°C (-13 ... 212 В°F) |
| Appropriate type | NJ 6-22-N... |
| Assured operating distance | 0 ... 4.86 mm |
| CSA approval | cCSAus Listed, General Purpose |
| CE marking | [*PD-Z02585A*] |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection category ""ic"" Use is restricted to the following stated conditions |
Comments
No comments yet