Pepperl+Fuchs NMB10-30GM65-Z0-NFE-V1
Inductive sensor
- Stainless steel sensing face
- Sensing range 10 mm
- 2-wire DC
- Nonferrous targets
- Overview
- Comments
Hysteresis | 3 ... 15 typ. 10 % |
Reduction factor rAl | 1 |
Voltage drop | 5.5 V |
Assured operating distance | 0 ... 8.1 mm |
CCC approval | CCC approval / marking not required for products rated 36 V |
Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
UL approval | cULus Listed, General Purpose |
Short-circuit protection | no |
Reduction factor rCu | 1.1 |
Reverse polarity protection | yes |
Switching frequency | 5 Hz |
Ambient temperature | -40 ... 70 В°C (-40 ... 158 В°F) |
Output type | 2-wire |
Housing material | Stainless steel 1.4305 / AISI 303 |
Rated operating distance | 10 mm |
Sensing face | Stainless steel 1.4305 / AISI 303 |
Reduction factor r304 | 0 |
Reduction factor rSt37 | 0 |
Operating voltage | 6 ... 30 V |
CSA approval | cCSAus Listed, General Purpose |
Operation indicator | 4-way LED |
Connection type | Connector M12 x 1 , 4-pin |
Off-state current | 1 mA |
Installation | flush |
Actuating element | Nonferrous targets |
Operating current | 2 ... 100 mA |
Output type | Two-wire |
Switching function | Normally open (NO) |
Reduction factor rBrass | 0.9 |
Output polarity | DC |
Degree of protection | IP67 / IP68 / IP69K - cordset dependent according to cable specification |
People also buy
Comments
No comments yet