Pepperl+Fuchs NMB2-12GM65-E2-FE-V1
Inductive sensor
Series: Cylindrical type, Housing diameter: 12 mm, Housing material: Stainless steel 1.4305 / AISI 303, Rated operating distance: 2 mm, Connection type: V1 connector (M12 x 1), 4-pin, Output type: 3-wire, Installation: flush, Type of voltage: DC
Item Number:
NMB2-12GM65-E2-FE-V1
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
General specifications | ||
Switching element function | PNP | |
Rated operating distance | 2 mm | |
Installation | flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 1.62 mm | |
Actuating element | Ferrous targets | |
Reduction factor rAl | 0 | |
Reduction factor rCu | 0 | |
Reduction factor r304 | 0.25 | |
Reduction factor r316Ti | 0.1 | |
Reduction factor rSt37 | 1 | |
Reduction factor rBrass | 0 | |
Nominal ratings | ||
Operating voltage | 10 ... 30 V DC | |
Switching frequency | 100 Hz | |
Hysteresis | 3 ... 15 typ. 5 % | |
Reverse polarity protection | reverse polarity protected | |
Short-circuit protection | pulsing | |
Voltage drop | less than or equal to 2 V DC | |
Operating current | less than or equal to 200 mA | |
Current consumption | < 14 mA | |
Off-state current | less than or equal to 10 mA | |
Functional safety related parameters | ||
MTTFd | 990 a | |
Mission Time (TM) | 20 a | |
Diagnostic Coverage (DC) | 0 % | |
Indicators/operating means | ||
Operation indicator | 4-way dual LED | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CSA approval | cCSAus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated less than or equal to 36 V | |
Ambient conditions | ||
Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
Mechanical specifications | ||
Connection type | V1 connector (M12 x 1), 4-pin | |
Housing material | Stainless steel 1.4305 / AISI 303 | |
Sensing face | Stainless steel 1.4305 / AISI 303 | |
Housing diameter | 12 mm | |
Degree of protection | IP67 / IP68 / IP69K - cordset dependent according to cable specification |
People also buy
Comments
No comments yet