Pepperl+Fuchs NMN20-18GM50-E2-V1-F
Inductive sensor
Series: Cylindrical type, Housing diameter: 18 mm, Housing material: Stainless steel 1.4435 / AISI 316L, Rated operating distance: 20 mm, Connection type: Connector M12 x 1 , 4-pin, Output type: 3-wire, Installation: non-flush, Type of voltage: DC
- Overview
- Comments
General specifications | ||
Switching element function | PNP | |
Rated operating distance | 20 mm | |
Installation | non-flush | |
Output polarity | DC | |
Assured operating distance | 0 ... 16.2 mm | |
Reduction factor rAl | 1 | |
Reduction factor rCu | 0.9 | |
Reduction factor r304 | 0.3 (0.6 of material thickness 2 mm) | |
Reduction factor rSt37 | 1 | |
Nominal ratings | ||
Installation conditions | ||
A | 34 mm (mild steel) 36 mm (stainless steel) 20 mm (aluminum) 22 mm (brass) | |
B | 41 mm | |
C | 60 mm | |
F | 200 mm | |
Operating voltage | 10 ... 30 V | |
Switching frequency | 0 ... 200 Hz | |
Hysteresis | 3 ... 15 typ. 5 % | |
Reverse polarity protection | yes | |
Short-circuit protection | yes | |
Voltage drop | less than or equal to 2 V | |
Operating current | 0 ... 200 mA | |
Off-state current | less than or equal to 0.1 mA | |
No-load supply current | less than or equal to 10 mA | |
Switching state indicator | LED, yellow | |
Limit data | ||
Operating pressure statically | 60 bar (870.2 psi) max. | |
Approvals and certificates | ||
UL approval | cULus Listed, General Purpose | |
CSA approval | cCSAus Listed, General Purpose | |
CCC approval | CCC approval / marking not required for products rated less than or equal to 36 V | |
Ambient conditions | ||
Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector M12 x 1 , 4-pin | |
Housing material | Stainless steel 1.4435 / AISI 316L | |
Sensing face | Stainless steel 1.4435 / AISI 316L | |
Housing diameter | 18 mm | |
Degree of protection | IP68 / IP69K | |
Mass | 24 g |
People also buy
Comments
No comments yet