+421 552 601 099
+1 888 384-58-19

A3M60A-S4PB014X17
Absolute encoders

General specification:

Specification:

Part Number1053341
Repeat accuracy:± 0.15 ° (at room temperature)
Resistance to shocks:100 g, 6 ms (according to EN 60068-2-27)
Max. angular acceleration:500,000 rad/s²
Operating voltage range:10 V ... 32 V
Resistance to vibration:30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6)
Mass:0.28 kg
Electrical interface:PROFIBUS DP
Initialization time:Ca. 1 s
Housing material:Aluminum
Storage temperature range:-40 °C ... +100 °C
Start up torque:+20 °C
Reverse polarity protection:1
EMC:(according to EN 61000-6-2 and EN 61000-6-3)
Connection type:3 x M12, 5-pin, axial
Data transmission rate (baud rate):≤ 12 MBaud
Flange material:Aluminum
Shaft material:Stainless steel
Working temperature range:-30 °C ... +80 °C
Enclosure rating:IP 67 (according to IEC 60529), housing, IP 67 (according to IEC 60529), Shaft
Bus termination:DIP switch
Error limits:± 0.35 ° (at room temperature)
Data protocol:PROFIBUS DP V0, PROFIBUS DP V1 + V2
Max. number of steps per revolution:16,384, programmable
Bus:PROFIBUS DP
Mechanical interface:Solid shaft, Face mount flange
MTTFd: mean time to dangerous failure:60 a (EN ISO 13849-1)
Start up torque with shaft seal:1 Ncm
Resolution power:16,384 x 131,072
Resolution:14 bit x 17 bit
Operating torque:0.8 Ncm (+20 °C)
Permissible Load capacity of shaft:40 N (axial), 80 N (radial)
Shaft length:19 mm
Permissible relative humidity:95 % (Condensation not permitted)
Max. number of revolutions:131,072, programmable
Shaft diameter:10 mm
Bearing lifetime:3.0 x 10^9 revolutions