Sick ATM60-A1A12X12
ATM60 Absolute encoder
- Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
- Mechanical interface: face mount flange, servo flange, blind hollow shaft and extensive adapter accessories
- Zero-set and preset functions via hardware or software
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
| Part Number | 1030005 |
| Power consumption max. without load: | 0.8 W |
| MTTFd: mean time to dangerous failure: | 150 a (EN ISO 13849-1) |
| Parameterising data: | Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution |
| Interface signals: | Clock +, Clock -, Data +, Data-, Programming interface: RS-422 |
| Code sequence: | CW/CCW |
| Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
| Resolution: | 12 bit x 12 bit |
| Repeat accuracy: | 0.1 ° |
| Initialization time: | 1,050 ms |
| Electrical interface: | SSI |
| Mass: | 0.5 kg |
| Max. angular acceleration: | 500,000 rad/s² |
| Mechanical interface: | Solid shaft, Servo flange |
| Housing material: | Die-cast aluminum |
| Max. number of steps per revolution: | 4,096 |
| Shaft diameter: | 6 mm |
| Connection type: | Connector M23, 12-pin, radial |
| CW/CCW (counting sequence when turning): | L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) |
| Shaft length: | 10 mm |
| SET (electronic adjustment): | H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) |
| Bearing lifetime: | 3.6 x 10^9 revolutions |
| Clock frequency: | 1 MHz |
| Storage temperature range: | -40 °C ... +100 °C, without package |
| Permissible relative humidity: | 98 % |
| Error limits: | ± 0.25 ° |
| Max. number of revolutions: | 4,096 |
| Moment of inertia of the rotor: | 35 gcm² |
| Operating torque with shaft seal: | 1.8 Ncm |
| Permissible Load capacity of shaft: | 300 N (radial), 50 N (axial) |
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
| Measuring step: | 0.043 ° |
| Operating torque without shaft seal: | 0.3 Ncm |
| Enclosure rating: | IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Resolution power: | 4,096 x 4,096 |
| Code type: | Binary, Gray |
| Start up torque with shaft seal: | 2.5 Ncm |
| Working temperature range: | -20 °C ... +85 °C |
| Start up torque without shaft seal: | 0.5 Ncm |
| Operating voltage range: | 10 V ... 32 V |
| Shaft material: | Stainless steel |
| Flange material: | Aluminum |
People also buy
Comments
No comments yet