Sick ATM60-AAK12X12
ATM60 Absolute encoder
- Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
- Mechanical interface: face mount flange, servo flange, blind hollow shaft and extensive adapter accessories
- Zero-set and preset functions via hardware or software
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
| Part Number | 1030010 |
| SET (electronic adjustment): | H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) |
| Code type: | Binary, Gray |
| Storage temperature range: | -40 °C ... +100 °C, without package |
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
| MTTFd: mean time to dangerous failure: | 150 a (EN ISO 13849-1) |
| CW/CCW (counting sequence when turning): | L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) |
| Error limits: | ± 0.25 ° |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Start up torque with shaft seal: | 1.2 Ncm |
| Connection type: | Cable, 12-pin, radial, 1.5 m |
| Flange material: | Aluminum |
| Resolution power: | 4,096 x 4,096 |
| Operating voltage range: | 10 V ... 32 V |
| Housing material: | Die-cast aluminum |
| Initialization time: | 1,050 ms |
| Working temperature range: | -20 °C ... +85 °C |
| Interface signals: | Clock +, Clock -, Data +, Data-, Programming interface: RS-422 |
| Mechanical interface: | Blind hollow shaft |
| Code sequence: | CW/CCW |
| Permissible relative humidity: | 98 % |
| Permissible movement axial static/dynamic: | ± 0.5 mm, ± 0.2 mm |
| Moment of inertia of the rotor: | 55 gcm² |
| Max. angular acceleration: | 500,000 rad/s² |
| Repeat accuracy: | 0.1 ° |
| Clock frequency: | 1 MHz |
| Enclosure rating: | IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal |
| Mass: | 0.4 kg |
| Measuring step: | 0.043 ° |
| Shaft diameter: | 6 mm, 1/4 " 8 mm, 3/8 " 10 mm, 1/2 " 12 mm 14 mm 15 mm |
| Power consumption max. without load: | 0.8 W |
| Operating torque with shaft seal: | 0.8 Ncm |
| Max. number of revolutions: | 4,096 |
| Electrical interface: | SSI |
| Max. number of steps per revolution: | 4,096 |
| Permissible movement radial static/dynamic: | ± 0.3 mm, ± 0.1 mm |
| Parameterising data: | Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution |
| Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
| Bearing lifetime: | 3.6 x 10^9 revolutions |
| Shaft material: | Stainless steel |
| Resolution: | 12 bit x 12 bit |
People also buy
Comments
No comments yet