Sick DBS50E-S5AM00500
DBS50 Incremental encoder

Sick DBS50E-S5AM00500
  • Connection with universal cable outlet
  • Face mount flange with 8 mm solid shaft
  • Face mount flange with 2 mounting hole patterns and servo groove
Item Number: DBS50E-S5AM00500
130.90
-
+
Total price: 130.90
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments

Specification:

Part Number1067493
Shaft material:Stainless steel
Maximum operating speed:8,000 U/min
Operating torque:0.6 Ncm (+20 °C)
Reference signal, number:1
Measuring step deviation:± 18 ° / impulses per relovution
Maximum output frequency:300 kHz
Moment of inertia of the rotor:0.65 gcm²
Duty cycle:≤ 0.5 ± 5 %
Measuring step:90 ° / electronically/pulses
Resistance to vibration:20 g, 10 Hz ... 2,000 Hz (EN 60068-2-6)
Operating speed:6,000 /min
Operating voltage range:4.5 V ... 5.5 V
Mass:180 g
EMC:(according to EN 61000-6-2 and EN 61000-6-4 (class A))
Power consumption max. without load:Without load
Load current max.:30 mA
Bearing lifetime:2 x 10^9 revolutions
MTTFd: mean time to dangerous failure:600 a (EN ISO 13849-1)
Permissible shaft loading radial/axial:30 N (axial), 50 N (radial)
Reverse polarity protection:0
Pulses per revolution:500
Connection type:Cable, 8-wire, universal, 5 m
Reference signal, position:90 °, electronically, gated with A and B
Max. angular acceleration:500,000 rad/s²
Short-circuit protection of the outputs:1
Enclosure rating:IP 65
Mechanical interface:Solid shaft, Face mount flange
Initialization time:< 3 ms
Electrical interface:4.5 V ... 5.5 V, TTL/RS422
Operating power consumption (no load):50 mA
Start up torque:0.9 Ncm (+20 °C)
Shaft diameter:8 mm x 15.5 m
Flange material:Aluminum
Resistance to shocks:100 g (EN 60068-2-27)
Working temperature range:-20 °C ... +85 °C
Permissible relative humidity:90 % (condensation of the optical scanning not permitted)
Error limits:± 54 ° (/pulses per revolution)
Material, cable:PVC
Storage temperature range:-40 °C ... +100 °C, without package
Housing material:Aluminum

Comments

No comments yet

Write a comment