Sick IQ20-07BPPDQ0S

Inductive proximity sensor

Sick IQ20-07BPPDQ0S

Datasheet:

• Article: 6042045
• Case type: Rectangular
• Dimensions (W x H x D): 20 mm x 32 mm x 8 mm
• Sensing distance S_n: 7 mm
• Sensing distance ensured S_a: 5.67 mm
• Installation: Flush
• Switching frequency: 150 Hz
• Connection type: Cable with M12 connector, 4-pin, 0.3 m
• Switching output: PNP
• Output function: Complementary
• Electrical version: DC. current, 4-wire
• Protection type: IP67
• Supply voltage: 10 V DC ... 30 V DC
• Residual ripple: ? 10%
• Voltage drop: < 2.5 V
• Current consumption: 15 mA
• Ready delay: ? 20 ms
• Hysteresis: 1 % . .. 15%
• Reproducibility: ± 5%
• Temperature deviation (from S_r): ± 10%
• EMC: According to EN 60947-5-2
• DC current I_a: ? 200 mA
• Cable material: Polyurethane
• Short-circuit protection short circuit: ?
• Polarity inversion protection: ?
• Shock and vibration resistance: 30 g, 11 ms/10...55 Hz, 1 mm
• Temperature range at operating: –25 °C ... +70 °C
• Housing material: Zinc, die-cast, GD Zn
• Material, active surface: Plastic, PA12
• DC_avg: 0 %
• Note: Values are indicative and subject to change
• Stainless steel (V2A): Approx. 0.7
• Aluminum (Al): Approx. 0.4
• Copper (Cu): Approx. 0.3
• Brass (Ms): Approx. 0.4
• Note: For relevant graphic materials, see section. “Installation instructions”
• A: 0 mm
• B: 20 mm
• C: 20 mm
• D: 21 mm
• E: 0 mm
• F: 60 mm
• Series:IQV
• Sensing distance: 7 mm
• Output type: PNP
• Mounting: flush
• Housing type: rectangular
• Output signal function: complementary