Sick KT10W-2P1115
Registration sensors
- Very low jitter (< 10 µs)
- Precise light spot
- Best contrast resolution thanks to RGB LED technology
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
| Part Number | 1028232 |
| Time delay: | 20 ms, adjustable |
| Jitter: | < 10 µs |
| Retention time (ET): | 25 ms, non-volatile memory |
| Light spot direction : | Vertical |
| UL File No.: | NRKH.E181493 & NRKH7.E181493 |
| Housing material: | Metal, Zinc diecast |
| Wave length: | 470 nm, 525 nm, 640 nm |
| Circuit protection: | Output Q short-circuit protected, Outputs overcurrent and short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Teach-in mode: | Static 2-point teach-in, Dynamic teach-in (min/max) |
| Connection type: | Male connector M12, 5-pin |
| Sensing distance tolerance: | ± 3 mm |
| Sensing distance : | 10 mm |
| Ambient operating temperature: | -10 °C ... +55 °C |
| Weight: | 400 g |
| Light spot size: | 0.8 mm x 4 mm |
| Supply voltage: | 10 V DC ... 30 V DC |
| Input, blanking input (AT) : | Blanked: U > 10 V ... < Uv, Free-running: U < 2 V, PNP: |
| Input, teach-in (ET): | PNP:, Run: U < 2 V, Teach: U = 10 V ... < UV |
| Fieldbus interface: | - |
| Type of light: | Visible blue light, Visible green light, Visible red light |
| Output current Imax.: | 100 mA |
| Ambient storage temperature: | -10 °C ... +75 °C |
| Switching mode: | PNP |
| Response time : | 20 µs |
| Switching frequency : | 25 kHz |
| Switching output: | PNP: HIGH = VS- ≤ 2 V / LOW approx. 0 V |
| Ripple : | ≤ 5 Vpp |
| Dimensions (W x H x D): | 30.4 mm x 53 mm x 80 mm |
| Power consumption : | < 120 mA |
| Light source : | LED |
| Shock load: | According to IEC 60068 |
| Protection class : | II |
| Light emission: | Long and short side of housing, exchangeable |
| Housing design (light emission): | Rectangular |
| Function: | Automatic drift correction |
| Enclosure rating: | IP 67 |
People also buy
Comments
No comments yet