Sick ML20M-P1211
Registration sensors

Sick ML20M-P1211
  • Tough metal housing
  • Scanning speed of 7 m/s
  • Monitor process quality via a control panel or SOPAS, via Ethernet
Item Number: ML20M-P1211
Price on Request
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Comments

Sick ML20M-P1211 is outdated.

The product has been Discontinued by the Manufacturer!

Contact sales manager for a replacement.

Specification:

Part Number1044675
Repeatability :0.6 mm
Tolerance lateral movement:± 5 mm
Enclosure rating:IP 65, IP 65
Ripple :≤ 5 Vpp
Fieldbus interface:EtherNet/IP
Data interface:Ethernet TCP/IP
Circuit protection:VS connections reverse-polarity protected, Output Q short-circuit protected, Interference suppression
Sensing distance:20 mm
Picture length (max.):1,000 mm
Input, blanking input (AT) :PNP: blanked: U = 12 V ... < Uv, free-running U < 2 V
Power consumption :< 6 W
Ambient light safety:30,000 lx
Encoder input:Differentiel: 4,5 V - 5,5 V / TTL / RS-422, Single ended: 12 V - 30 V / HTL / push-pull
Type of light:Visible white light
Supply voltage:12 V DC ... 30 V DC
Teach-in mode:Start stop teach, trigger teach
Shock load:According to IEC 60068
UL File No.:NRKH.E181493 & NRKH7.E181493
Housing design (light emission):Rectangular
Ambient operating temperature:-10 °C ... +55 °C
Picture length (min.):40 mm
Picture height (min.):34 mm
Connection type :Ethernet connection M12, 4-pin Connector M12, 12-pin
Retention time (ET):≥ 6 s, non-volatile memory
Ambient storage temperature:-20 °C ... +75 °C
Housing material:Metal
Wave length:400 nm ... 700 nm
Protection class:III
Weight:325 g
Encoder resolution:100 µm ... 400 µm (in 1 µm)
Initialization time:< 10 s
Light source :LED
Max. movement speed:7 m/s
Dimensions (W x H x D):46 mm x 77 mm x 46 mm
Status output:PNP: HIGH = VS - ≤ 2 V / LOW < 0,5 V
Input, teach-in (ET):PNP: Teach: U = 12 V ... < UV, Run: U < 2 V
Switching mode:PNP
Switching output:PNP: HIGH = VS - ≤ 2 V / LOW < 0,5 V
Output current Imax. :< 100 mA
Light spot size:60 mm x 3 mm
Sensing distance tolerance:± 2.5 mm

Comments

No comments yet

Write a comment