Sick SRS50S-HFA0-K22

Motor Feedback

Sick SRS50S-HFA0-K22

Datasheet:

• Article: 1051790
• Reliability class: SIL2 (IEC 61508), SILCL2 (IEC 62061)
• Category: 3 (EN ISO 13849)
• Maximum demand frequency: Continuous (Analog signals)
• Performance level: PL d (EN ISO 13849)
• PFH_D: probability of dangerous failure/h : 1.0 x 10^-8
• T_M (specified operating time): 20 years (EN ISO 13849)
• MTTFd: time to dangerous failure: 1.073 years (EN ISO 13849)
• Sine/cosine periods per revolution: 1.024
• Number of absolutely recorded revolutions: 1
• Total number of steps: 32.768
• Measurement step: 0.3? when interpolating sine and cosine signals, e.g. 12 bits
• Integral nonlinearity: Typ. ± 45 ?, Tolerances when processing sine/cosine signals, with unloaded stator coupling
• Differential non-linearity: ± 7 ?, Non-linearity of sine/cosine period
• Operating speed: ? 6.000 min? №, until the absolute position can be reliably aligned
• System accuracy: 52 ?
• Coding type for absolute value: Binary
• Coding curve: Increasing, with shaft rotation . Clockwise when viewed in direction A (see dimensional drawing). When rotating the shaft clockwise when viewed in direction A (see dimensional drawing)
• Communication interface: HIPERFACE
• Connection type: Connector, 8-pin, radial
• Supply voltage: 7 V DC ... 12 V DC
• Recommended supply voltage: 8 V DC
• Current consumption: 80 mA
• Output frequency of sine/cosine signals: ? 200 kHz
• Shaft version: Tapered shaft
• Flange type / stator coupling: Spring plate support, Spring plate support
• Weight: ? 0.2 kg
• Moment of inertia of the rotor: 10 gcmІ
• Operating speed: ? 12,000 min ?№
• Angular acceleration: ? 200,000 rad/sІ
• Operating torque: 0.2 Ncm
• Starting torque: + 0.4 Ncm
• Permissible radial movement of the shaft: ± 0.6 mm
• Permissible axial movement of the shaft: ± 0.95 mm
• Permissible movement of the shaft of the drive element, static: ± 0.5 mm radial, ± 0.75 mm axial,
• Permissible movement of the drive element shaft, dynamic: ± 0.1 mm radial, ± 0.2 mm axial,
• Angle movement perpendicular to the axis rotation, static: ± 0.005 mm/mm
• Angle movement perpendicular to the axis of rotation, dynamic: ± 0.0025 mm/mm
• Ball bearing life: 3.6 x 10 ⁹ turns
• Operating temperature range: –30 °C ... +115 °C
• Storage temperature range: –40 °C ... +125 °C , unpacked
• Relative humidity/condensation: 90%, No condensation allowed
• Shock resistance: 100 g, 10 ms, 10 ms (according to EN 60068-2-27)
• Vibration resistance frequency range: 20 g, 10 Hz ... 2.000 Hz (according to EN 60068-2-6)
• EMC: According to EN 61000-6-2 and EN 61000- 6-3
• Protection type: IP40, with mating plug installed (according to IEC 60529)
• Category: System rotation sensors motor feedback with HIPERFACE®
• Series:SRS/SRM50
• Mechanical design: tapered shaft