Baumer EIL580P-SC - optoPulse
Incremental encoder

Baumer EIL580P-SC - optoPulse

Voltage supply4.75...30 VDC
Reverse polarity protectionYes
Short-circuit proofYes
Operating temperature-40...+100 °C
Item Number: EIL580P-SC - optoPulse
342.25
-
+
Total price: 342.25
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments

In stock!!!

BAUMER Incremental encoder with clamping flange 58 mm precise optical

Output frequency≤300 kHz (TTL)
≤160 kHz (HTL)
Reverse polarity protectionYes
manufacter SKUEIL580P-SC - clamping flange
Sensing methodOptical
Admitted shaft load≤40 N axial
≤80 N radial
Reference signalZero pulse 90° or 180°
Starting torque≤0.015 Nm (+20 °C, IP 65)
≤0.02 Nm (+20 °C, IP 67)
Scan ratio45...55 % typical at 2048 ppr
Weight approx.300 g
Size (flange)ø58 mm
Relative humidity90 % non-condensing
Pulses per revolution1...65536
Programmable
parameters
Output level TTL/HTL
Pulse number 1...65536
Zero pulse width 90°/180°
Zero pulse position
Signal sequence
Voltage supply4.75...30 VDC
ApprovalUL 508 / CSA 22.2
MaterialsHousing: aluminium die-cast
Flange: aluminium
Solid shaft: stainless steel
Output stagesTTL/RS422
HTL/push-pull
Protection DIN EN 60529IP 65 (without shaft seal)
IP 67 (with shaft seal)
Initializing time≤30 ms after power on
ResistanceDIN EN 60068-2-6
Vibration 30 g, 10-2000 Hz
DIN EN 60068-2-27
Shock 300 g, 6 ms
ConnectionFlange connector M12, 8-pin
Flange connector M23, 12-pin
Cable
Interference immunityDIN EN 61000-6-2
Emitted interferenceDIN EN 61000-6-3
Shaft typeø10 x 20 mm, solid shaft with flat (clamping flange)
ø9.525 mm (3/8") x 20 mm, solid shaft with flat
Operating speed≤6000 rpm (+20 °C, IP 67)
≤12000 rpm (+20 °C, IP 65)
EIL580P-SC - clamping flange output signalsA+, B+, R+, A-, B-, R-
Consumption w/o load≤70 mA
Operating temperature-40...+100 °C
Short-circuit proofYes

Comments

No comments yet

Write a comment