Baumer FOG 9 + GT 7.08
Incremental encoders
| Voltage supply | 9...30 VDC; 5 VDC ±5 % |
| Consumption w/o load | ≤100 mA |
| Pulses per revolution | 100...5000 |
| Operating temperature | -30...+100 °C -25...+100 °C (>3072 pulses per revolution) |
Item Number:
FOG 9 + GT 7.08
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
| Rotor moment of inertia | 160 gcm² |
| Open-circuit voltage | 10...30 mV per rpm |
| Armature-circuit time-constant | |
| Calibration tolerance | ±5 % |
| Operating speed | ≤10000 rpm |
| Isolation class | B |
| Reversal tolerance | ≤0.1 % |
| Weight approx. | 1.3 kg |
| Consumption w/o load | ≤100 mA |
| Emitted interference | EN 61000-6-3 |
| Scan ratio | 40...60 % |
| Operating temperature | -30...+100 °C -25...+100 °C (>3072 pulses per revolution) |
| Output frequency | ≤120 kHz ≤300 kHz (on request) |
| Admitted shaft load | ≤200 N axial ≤300 N radial |
| Performance | 0.3 W (speed ≥5000 rpm) |
| Materials | Housing: aluminium die-cast Shaft: stainless steel |
| Interference immunity | EN 61000-6-2 |
| Linearity tolerance | ≤0.15 % |
| FOG 9 + GT 7.08 output signals | K1, K2, K0 + inverted Error output (only EMS) |
| Temperature coefficient | ±0.05 %/K (open-circuit) |
| manufacter SKU | FOG 9 + GT 7.08 |
| Pulses per revolution | 100...5000 |
| Phase shift | 90° ±20° |
| Connection | Flange connector M23, 12-pin Screw terminal connector Connecting cable (option) |
| Resistance | IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms |
| Approval | CE |
| Climatic test | Humid heat, constant (IEC 60068-2-3, Ca) |
| Reference signal | Zero pulse, width 90° |
| Protection DIN EN 60529 | IP 55 |
| Flange | EURO flange B10 |
| Shaft type | ø11 mm solid shaft |
| Voltage supply | 9...30 VDC; 5 VDC ±5 % |
| Output stages | HTL; TTL/RS422 |
| Size (flange) | ø115 mm |
| Operating torque typ. | 6 Ncm |
People also buy
Comments
No comments yet