Baumer GXN1H
Absolute encoders
| Voltage supply | 10...30 VDC |
| Reverse polarity protection | Yes |
| Consumption w/o load | ≤50 mA (24 VDC) |
| Operating temperature | -25...+70 °C |
| Inputs | TxD, RxD (RS232) Control signals UP/DOWN and zero ENABLE |
- Overview
- Comments
| Code sequence | CW/CCW coded by connection |
| Size (flange) | ø75 mm |
| Initializing time typ. | 50 ms after power on |
| Operating speed | ≤6000 rpm (mechanical) ≤6000 rpm (electric) |
| manufacter SKU | GXN1H |
| Number of cams | 250 |
| Voltage supply | 10...30 VDC |
| Protection DIN EN 60529 | IP 54 |
| Reverse polarity protection | Yes |
| Diagnostic functions | Code continuity check Signal frequency exceeded |
| Materials | Housing: steel Flange: aluminium |
| Connection | Cable 1 m, connector DSUB, 37pin |
| Relative humidity | 95 % non-condensing |
| Programming interface | RS232 |
| Emitted interference | DIN EN 61000-6-4 |
| Code | Binary |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms |
| Rotor moment of inertia | 20 gcm² |
| Sensing method | Optical |
| Inputs | TxD, RxD (RS232) Control signals UP/DOWN and zero ENABLE |
| Weight approx. | 700 g |
| Consumption w/o load | ≤50 mA (24 VDC) |
| Shaft type | ø14 mm (through hollow shaft) |
| Approval | UL approval / E63076 |
| Output stages | PNP or NPN open collector |
| Starting torque | ≤0.05 Nm (IP 54) |
| Function | Multiturn |
| Interfaces | Parallel (cams) 5 special outputs programmable |
| Programmable parameters | Steps per revolution Number of revolutions 2 presets (limits) Rotation speed monitoring |
| Steps per turn | ≤4096 / 12 bit |
| Absolute accuracy | ±0.03 ° |
| Operating temperature | -25...+70 °C |
| Number of turns | ≤4096 / 12 bit |
| Interference immunity | DIN EN 61000-6-2 |
Comments
No comments yet