Baumer MHAP 100 - HDmag
Magnetic ring encoder HeavyDuty

Baumer MHAP 100 - HDmag

Absolute encoder / Singleturn 8...17 Bit / Magnetic sensing / Through hollow shaft max. diam 80 mm

Item Number: MHAP 100 - HDmag
3165.09
-
+
Total price: 3165.09
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
  • Absolute encoder with magnetic sensing and without bearings
  • Sensor head with integrated FPGA signal processing
  • Absolute resolution max. 17 bit singleturn
  • Additional incremental output
  • Robust and wearless
  • Electronics is fully encapsulated
  • High protection
  • Large tolerances: axial В±1 mm, radial max. 0.5 mm
  • Simple mounting, easy adaptation
  • Several mounting possibilities
Steps per turn≤131072 / 17 bit
Operating speed≤8000 rpm
ApprovalCE
InterfaceSSI
Output frequency≤2 MHz
Bandwidth400 kHz (-3 dB)
Interference immunityEN 61000-6-2
Consumption w/o load≤300 mA
manufacter SKUMHAP 100 - HDmag
Operating temperature-20...+85 °C
CodeGray or binary
Axial tolerance±1 mm (wheel/head)
Harmonics typ.-40 dB
Shaft typeø16...80 mm (through hollow shaft)
Sensing methodMagnetic
DC offset≤20 mV
Phase shift90° ±5°
Output stagesHTL
TTL/RS422
Radial tolerance0.1...0.5 mm (wheel/head)
Output signalsA+, A-, B+, B-
Protection DIN EN 60529IP 67 (head)
IP 68 (wheel)
FunctionSingleturn
Sensing methodMagnetic
ConnectionFlange connector M23, 17-pin
Output signalsA+, A-, B+, B-
Emitted interferenceEN 61000-6-3
Size (flange)ø101.3 mm
Additional outputsSquare-wave TTL (RS422)
Square-wave universal HTL/TTL
SinCos
Sinewave cycles per turn1...8192
Voltage supply4.5...30 VDC
Scan ratio40...60 %
Sensor headFPGA signal processing
Code sequenceCW default
Voltage supply4.5...30 VDC
ResistanceIEC 60068-2-6
Vibration 30 g, 55-2000 Hz
IEC 60068-2-27
Shock 300 g, 2 ms
Voltage supply4.5...30 VDC
Difference of SinCos amplitude≤20 mV
Phase shift90° ±10°
Sensing methodMagnetic
Pulses per revolution1...131072
Output stagesSinCos 1 Vpp
Consumption w/o load≤300 mA
Accuracy of magnetic measure±400 '

Comments

No comments yet

Write a comment