Baumer MHAP 400 - HDmag
Magnetic ring encoder HeavyDuty
Absolute encoder Bearingless / Singleturn 8...17 Bit / Magnetic sensing / Through hollow shaft max. 340 mm
Item Number:
MHAP 400 - HDmag
The price is not final. Please check with the manager!
Contact our experts
- Overview
- Comments
- Absolute encoder with magnetic sensing and without bearings
- Sensor head with integrated FPGA signal processing
- Absolute resolution max. 17 bit singleturn
- Additional incremental output
- Robust and wearless
- Electronics is fully encapsulated
- High protection
- Large tolerances: axial В±1 mm, radial max. 0.5 mm
- Simple mounting, easy adaptation
- Several mounting possibilities
Accuracy of magnetic measure | ±150 ' |
Connection | Flange connector M23, 17-pin |
Output signals | A+, A-, B+, B- |
Sensing method | Magnetic |
manufacter SKU | MHAP 400 - HDmag |
Additional outputs | Square-wave TTL (RS422) Square-wave universal HTL/TTL SinCos |
Interface | SSI |
Pulses per revolution | 1...524288 |
Function | Singleturn |
Voltage supply | 4.5...30 VDC |
Sensor head | FPGA signal processing |
Voltage supply | 4.5...30 VDC |
Difference of SinCos amplitude | ≤20 mV |
Sensing method | Magnetic |
Steps per turn | ≤131072 / 17 bit |
Voltage supply | 4.5...30 VDC |
Resistance | IEC 60068-2-6 Vibration 30 g, 55-2000 Hz IEC 60068-2-27 Shock 300 g, 2 ms |
Output signals | A+, A-, B+, B- |
Protection DIN EN 60529 | IP 67 (head) IP 68 (wheel) |
Output stages | HTL TTL/RS422 |
Sensing method | Magnetic |
Operating temperature | -20...+85 °C |
Sinewave cycles per turn | 1...32768 |
Size (flange) | ø406.8 mm |
Emitted interference | EN 61000-6-3 |
Shaft type | ø70...340 mm (through hollow shaft) |
Interference immunity | EN 61000-6-2 |
Output stages | SinCos 1 Vpp |
Consumption w/o load | ≤300 mA |
Radial tolerance | 0.1...0.5 mm (wheel/head) |
Operating speed | ≤2000 rpm |
Axial tolerance | ±1 mm (wheel/head) |
Bandwidth | 400 kHz (-3 dB) |
Phase shift | 90° ±10° |
Scan ratio | 40...60 % |
Approval | CE |
Emitted interference | EN 61000-6-3 |
Harmonics typ. | -40 dB |
Code sequence | CW default |
Output frequency | ≤2 MHz |
Interference immunity | EN 61000-6-2 |
DC offset | ≤20 mV |
Consumption w/o load | ≤300 mA |
Code | Gray or binary |
Phase shift | 90° ±5° |
People also buy
Comments
No comments yet