Baumer MQR 3000F - HDmag flex
Magnetic ring encoder HeavyDuty

Baumer MQR 3000F - HDmag flex

Sensor head with magnetic tape for shaft 300...3183 mm

Voltage supply4.75...30 VDC
Consumption w/o load≤300 mA (24 VDC)
Output signalsSSI data (Linedriver RS485)
Operating temperature-40...+85 °C
Item Number: MQR 3000F - HDmag flex
3715.71
-
+
Total price: 3715.71
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments
  • "Quasi-absolute" (see below) encoder SSI without bearings
  • Flexible design for wide shaft diameter range
  • Position resolution singleturn up to 20 bit
  • Speed resolution up to 18 bit, speed output
  • Zero position and counting direction inputs
  • Status indication via system OK output and LED
  • Large mounting tolerances
Radial tolerance1...3 mm (belt to head)
Output frequency≤500 kHz (HTL), ≤2 MHz (TTL)
Operating temperature-40...+85 °C
Consumption w/o load≤300 mA (24 VDC)
ApprovalCE
Operating speed1850 rpm (ø300 mm)
150 rpm (ø1500 mm)
see diagram below
Pulses per revolution1024...4096
Voltage supply4.75...30 VDC
Output stagesSinCos 1 Vpp
Output signalsA+, A-, B+, B-
Scan ratio45...55 %
Additional outputsSquare-wave HTL, TTL/RS422 or SinCos
Position resolution0...20 bit singleturn
Output frequency≤500 kHz
Phase shift90° ±2°
MQR 3000F - HDmag flex dimensions (sensor head)165 x 25 x 93 mm
Protection DIN EN 60529IP 67
ConnectionFlange connector M23, 17-pin
Input signalsSSI clock, set zero, counting direction
Output signalsSSI data (Linedriver RS485)
Shaft typeø300...3183 mm (through hollow shaft)
Axial tolerance±5 mm (belt to head)
Sinewave cycles per turn1024...4096
Interference immunityEN 61000-6-2
manufacter SKUMQR 3000F - HDmag flex
Emitted interferenceEN 61000-6-3
Speed resolution≤18 bit (±20...±2000 rpm)
Code sequencePositiv at CW
Output signalsA+, A-, B+, B-
Weight approx.730 g (head)
120 g (belt/m), 17 g (lock)
CodeGray or binary
ResistanceIEC 60068-2-6
Vibration 30 g, 10-2000 Hz
IEC 60068-2-27
Shock 300 g, 6 ms
Phase shift90° ±2°
Output stagesHTL, TTL/RS422
Status indicatorColor-LED, system OK output

Comments

No comments yet

Write a comment