Baumer TIL Y 1
Incremental encoders
| Voltage supply | 5 VDC ±5 % 8...26 VDC |
| Reverse polarity protection | Yes |
| Consumption w/o load | ≤85 mA |
| Operating temperature | -20...+85 °C |
- Overview
- Comments
| Shaft type | ø12 mm (blind hollow shaft) |
| Emitted interference | DIN EN 61000-6-3 |
| Protection DIN EN 60529 | IP 65 |
| Motor shaft tolerance | 0.25 mm axial 0.1 mm radial |
| TIL Y 1 output signals | A, B, N + inverted |
| Starting torque | ≤0.01 Nm (+20 °C) |
| Relative humidity | 90 % non-condensing |
| Reference signal | Zero pulse, width 90° |
| Reverse polarity protection | Yes |
| Connection | Cable 0.6 m |
| Interference immunity | DIN EN 61000-6-2 |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz DIN EN 60068-2-27 Shock 100 g, 11 ms |
| Weight approx. | 320 g |
| Operating temperature | -20...+85 °C |
| Sensing method | Optical |
| Mounting kit | 042 |
| Pulses per revolution | 100...2048 |
| Operating speed | ≤3000 rpm |
| Size (flange) | 60 x 72 mm |
| Output stages | TTL linedriver (short-circuit proof) HTL push-pull (short-circuit proof) |
| Output frequency | ≤120 kHz |
| Consumption w/o load | ≤85 mA |
| Voltage supply | 5 VDC ±5 % 8...26 VDC |
| manufacter SKU | TIL Y 1 |
| Materials | Housing: aluminium Shaft: stainless steel |
Comments
No comments yet