Pepperl+Fuchs NBB15-30GM50-WS-V93
Inductive sensor
- Basic series
- 15 mm flush
- 2-wire AC
- Overview
- Comments
CCC approval | Certified by China Compulsory Certification (CCC) |
Reduction factor rAl | 0.33 |
Output type | Two-wire |
Ambient temperature | -25 ... 70 В°C (-13 ... 158 В°F) |
CSA approval | cCSAus Listed, General Purpose |
Degree of protection | IP67 |
Operating voltage | 20 ... 253 V |
Operating voltage indicator | LED, green |
Actual operating distance | 13.5 ... 16.5 mm |
Connection type | Connector 7/8 inch-16 UN , 3-pin |
Installation | quasi flush |
Voltage drop | < 5 V (IL > 50 mA); < 8 V (IL < 50 mA) |
Off-state current | 0 ... 1.7 mA |
Hysteresis | typ. 5 % |
Switching function | Normally open (NO) |
Reduction factor r304 | 0.81 |
Note | 1) In the temperature range below 0 В°C, permissible operating voltage Ub 80...253 V Safety fuse ≤ 0.3 A (quick-blow) according to IEC 60127-2 Sheet 1 Recommendation: after a short circuit, check that the device is functioning correctly. |
Switching state indicator | LED, yellow |
Output type | 2-wire |
Reverse polarity protection | reverse polarity tolerant |
Switching frequency | 0 ... 20 Hz |
Output polarity | AC |
Sensing face | PBT |
UL approval | cULus Listed, General Purpose |
Momentary current (20 ms, 0.1 Hz) | 0 ... 1600 mA |
Operating current | 5 ... 200 mA |
Reduction factor rCu | 0.28 |
Rated operating distance | 15 mm |
Housing material | brass, nickel-plated |
Assured operating distance | 0 ... 12.15 mm |
People also buy
Comments
No comments yet