Sick ATM60-A1L12X12
ATM60 Absolute encoder
- Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
- Mechanical interface: face mount flange, servo flange, blind hollow shaft and extensive adapter accessories
- Zero-set and preset functions via hardware or software
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
| Part Number | 1030007 |
| Repeat accuracy: | 0.1 ° |
| Housing material: | Die-cast aluminum |
| Electrical interface: | SSI |
| Enclosure rating: | IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal |
| Flange material: | Aluminum |
| Working temperature range: | -20 °C ... +85 °C |
| SET (electronic adjustment): | H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) |
| Permissible Load capacity of shaft: | 300 N (radial), 50 N (axial) |
| Operating torque without shaft seal: | 0.3 Ncm |
| Moment of inertia of the rotor: | 35 gcm² |
| Code type: | Binary, Gray |
| Error limits: | ± 0.25 ° |
| Max. angular acceleration: | 500,000 rad/s² |
| Start up torque without shaft seal: | 0.5 Ncm |
| Shaft diameter: | 6 mm |
| Code sequence: | CW/CCW |
| Operating voltage range: | 10 V ... 32 V |
| Storage temperature range: | -40 °C ... +100 °C, without package |
| Parameterising data: | Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution |
| Connection type: | Cable, 12-pin, radial, 3 m |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| CW/CCW (counting sequence when turning): | L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) |
| Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
| MTTFd: mean time to dangerous failure: | 150 a (EN ISO 13849-1) |
| Power consumption max. without load: | 0.8 W |
| Operating torque with shaft seal: | 1.8 Ncm |
| Start up torque with shaft seal: | 2.5 Ncm |
| Max. number of revolutions: | 4,096 |
| Clock frequency: | 1 MHz |
| Mechanical interface: | Solid shaft, Servo flange |
| Bearing lifetime: | 3.6 x 10^9 revolutions |
| Mass: | 0.5 kg |
| Max. number of steps per revolution: | 4,096 |
| Resolution: | 12 bit x 12 bit |
| Shaft length: | 10 mm |
| Shaft material: | Stainless steel |
| Measuring step: | 0.043 ° |
| Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
| Interface signals: | Clock +, Clock -, Data +, Data-, Programming interface: RS-422 |
| Initialization time: | 1,050 ms |
| Permissible relative humidity: | 98 % |
| Resolution power: | 4,096 x 4,096 |
People also buy
Comments
No comments yet