Sick ATM60-A4N12X12
ATM60 Absolute encoder
- Extremely rugged, tried-and-tested absolute multiturn encoder with a resolution of up to 26 bits
- Mechanical interface: face mount flange, servo flange, blind hollow shaft and extensive adapter accessories
- Zero-set and preset functions via hardware or software
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
Part Number | 1032915 |
Clock frequency: | 1 MHz |
Mass: | 0.5 kg |
SET (electronic adjustment): | H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) |
Max. number of steps per revolution: | 4,096 |
Max. number of revolutions: | 4,096 |
Start up torque with shaft seal: | 2.5 Ncm |
Flange material: | Aluminum |
Error limits: | ± 0.25 ° |
Bearing lifetime: | 3.6 x 10^9 revolutions |
Resolution power: | 4,096 x 4,096 |
Resolution: | 12 bit x 12 bit |
Parameterising data: | Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution |
Max. angular acceleration: | 500,000 rad/s² |
Mechanical interface: | Solid shaft, Face mount flange |
Repeat accuracy: | 0.1 ° |
Enclosure rating: | IP 43 (according to IEC 60529), without shaft seal, on encoder flange not sealed, IP 65 (according to IEC 60529), without shaft seal, on encoder flange sealed, IP 67 (according to IEC 60529), with shaft seal |
Working temperature range: | -20 °C ... +85 °C |
Permissible relative humidity: | 98 % |
Start up torque without shaft seal: | 0.5 Ncm |
MTTFd: mean time to dangerous failure: | 150 a (EN ISO 13849-1) |
Connection type: | Cable, 12-pin, radial, 10 m |
Code type: | Binary, Gray |
Operating voltage range: | 10 V ... 32 V |
Interface signals: | Clock +, Clock -, Data +, Data-, Programming interface: RS-422 |
Measuring step: | 0.043 ° |
Power consumption max. without load: | 0.8 W |
CW/CCW (counting sequence when turning): | L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) |
Shaft length: | 19 mm |
Housing material: | Die-cast aluminum |
Shaft material: | Stainless steel |
Storage temperature range: | -40 °C ... +100 °C, without package |
Code sequence: | CW/CCW |
Moment of inertia of the rotor: | 35 gcm² |
Shaft diameter: | 10 mm |
Permissible Load capacity of shaft: | 300 N (radial), 50 N (axial) |
Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
Operating torque with shaft seal: | 1.8 Ncm |
Initialization time: | 1,050 ms |
EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
Electrical interface: | SSI |
Resistance to vibration: | 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) |
Operating torque without shaft seal: | 0.3 Ncm |
People also buy
Comments
No comments yet