Sick FFUC25-1G1IO
Temperature and Flow sensors

Sick FFUC25-1G1IO
  • Flow sensor for conductive and non-conductive liquids
  • Compact design with no moving parts
  • Process temperature up to 80 °C, process pressure up to 16 bar
Item Number: FFUC25-1G1IO
1093.95
-
+
Total price: 1093.95
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments

Specification:

Part Number6049019
Puls width:≤ 1 s
Minimim flow:5 l/min
Ripple:≤ 5 Vpp
Capacitive load:100 nF
Connection type:Round connector M12 x 1, 5-pin
Housing material:PSU
Signal voltage LOW:≤ 2 V
Output signal:Analog output: 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature
1 pulse/status output: transistor output for flow rate meter, empty pipe detection, flow monitoring, dosing output, flow direction (depending on type)
Outlet zone:10 cm
Power consumption:≤ 180 mA
Nominal width measuring tube:NW 25
Ambient storage temperature:-20 °C ... +70 °C
Upper signal level:20 mA ... 20.5 mA
Response time:Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s
Protection class:III
Enclosure rating:IP 67
Supply voltage:18 V DC ... 30 V DC
Inductive load:1 H
Weight:460 g
Output load:< 500 Ohm
Maximum flow:240 l/min
Process connection:G 1 ¼
Impuls/frequency output:0 kHz ... 10 kHz
Ambient temperature operation:0 °C ... +60 °C
Conductivity:No limitation
Wetted parts:PSU
Process pressure:Max. 10 bar
Process temperature:0 °C ... +80 °C
Accuracy of sensor element:1 % (of reading +/- 3 mm/s (with calibration report))
Lower signal level:3.8 mA ... 4 mA
Output current:< 100 mA
Medium:Fluids
Resolution:0.03 l/min
Initialization time:≤ 5 s
Repeatability:≤ 0.5 %
Signal voltage HIGH:Vs - 2 V
Inlet zone:60 cm

Comments

No comments yet

Write a comment