Sick FFUS10-1G1SR
Temperature and Flow sensors

Sick FFUS10-1G1SR
  • Flow sensor for conductive and non-conductive liquids
  • Compact design with no moving parts
  • Process temperature up to 80 °C, process pressure up to 16 bar
Item Number: FFUS10-1G1SR
912.79
-
+
Total price: 912.79
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments

Specification:

Part Number6043743
Supply voltage:18 V DC ... 30 V DC
Ripple:≤ 5 Vpp
Accuracy of sensor element:2 % (of final value)
Puls width:≤ 1 s
Initialization time:≤ 5 s
Power consumption:≤ 180 mA
Signal voltage LOW:≤ 2 V
Medium:Fluids
Process temperature:0 °C ... +80 °C
Process connection:G ?
Connection type:Round connector M12 x 1, 8-pin
Process pressure:Max. 16 bar
Impuls/frequency output:0 kHz ... 10 kHz
Inductive load:1 H
Minimim flow:0.3 l/min
Repeatability:≤ 0.5 %
Maximum flow:21 l/min
Response time:Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s
Upper signal level:20 mA ... 20.5 mA
Resolution:0.003 l/min
Housing material:PSU
Weight:340 g
Output signal:Analog output: 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature
2 pulse/status output: transistor output for flow rate meter, empty pipe detection, flow monitoring
1 digital input for dosing and counter reset
Capacitive load:100 nF
Signal voltage HIGH:Vs - 2 V
Lower signal level:3.8 mA ... 4 mA
Output load:< 500 Ohm
Output current:< 100 mA
Outlet zone:0 cm
Protection class:III
Wetted parts:PSU
Ambient temperature operation:0 °C ... +60 °C
Inlet zone:20 cm
Ambient storage temperature:-20 °C ... +70 °C
Conductivity:No limitation
Nominal width measuring tube:NW 10
Enclosure rating:IP 67

Comments

No comments yet

Write a comment