Sick FFUS20-1C1IO
Temperature and Flow sensors

Sick FFUS20-1C1IO
  • Flow sensor for conductive and non-conductive liquids
  • Compact design with no moving parts
  • Process temperature up to 80 °C, process pressure up to 16 bar
Item Number: FFUS20-1C1IO
950.19
-
+
Total price: 950.19
The price is not final. Please check with the manager!
Contact our experts
  • Overview
  • Comments

Specification:

Part Number6049061
Connection type:Round connector M12 x 1, 5-pin
Supply voltage:18 V DC ... 30 V DC
Ripple:≤ 5 Vpp
Response time:Filter off 100 ms, filter low 300 ms, filter medium 1 s, filter strong 4.2 s
Puls width:≤ 1 s
Wetted parts:PSU
Outlet zone:10 cm
Nominal width measuring tube:NW 20
Medium:Fluids
Maximum flow:60 l/min
Accuracy of sensor element:2 % (of final value)
Output current:< 100 mA
Output signal:Analog output: 4 mA ... 20 mA, 0 mA ... 20 mA current flow and temperature
1 pulse/status output: transistor output for flow rate meter, empty pipe detection, flow monitoring, dosing output, flow direction (depending on type)
Lower signal level:3.8 mA ... 4 mA
Enclosure rating:IP 67
Repeatability:≤ 0.5 %
Housing material:PSU
Signal voltage LOW:≤ 2 V
Output load:< 500 Ohm
Initialization time:≤ 5 s
Process pressure:Max. 10 bar
Process temperature:0 °C ... +80 °C
Process connection:Clamp (DIN 11864-3)
Conductivity:No limitation
Protection class:III
Impuls/frequency output:0 kHz ... 10 kHz
Weight:420 g
Ambient storage temperature:-20 °C ... +70 °C
Minimim flow:3.5 l/min
Capacitive load:100 nF
Inlet zone:50 cm
Ambient temperature operation:0 °C ... +60 °C
Inductive load:1 H
Power consumption:≤ 180 mA
Upper signal level:20 mA ... 20.5 mA
Resolution:0.012 l/min
Signal voltage HIGH:Vs - 2 V

Comments

No comments yet

Write a comment