Sick KTL5G-2P11
Registration sensors
- Various heat-resistant fiber-optic cable models are available
- Various teach-in methods, including potentiometer
- Analog output
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
Part Number | 1016294 |
Ambient operating temperature: | -10 °C ... +55 °C |
Switching mode: | PNP |
Housing material: | Metal, Zinc diecast |
Sensing distance: | Dependent on the fiber-optic cablethe fiber-optic cable |
UL File No.: | NRKH.E181493 & NRKH7.E181493 |
Supply voltage: | 10 V DC ... 30 V DC |
Switching frequency : | 10 kHz |
Wave length: | 520 nm |
Protection class : | II |
Response time : | 50 µs |
Type of light: | Visible green light |
Enclosure rating: | IP 67 |
Housing design (light emission): | Rectangular |
Shock load: | According to IEC 60068 |
Teach-in mode: | Manual adjustment, potentiometer |
Fieldbus interface: | - |
Ripple : | ≤ 5 Vpp |
Light spot size: | Dependent on the fiber-optic cable |
Switching output: | PNP: HIGH = VS- ≤ 2 V / LOW approx. 0 V |
Weight: | 400 g |
Output current Imax.: | 100 mA |
Power consumption : | < 80 mA |
Output function: | Light/dark switching |
Dimensions (W x H x D): | 30.4 mm x 53 mm x 80 mm |
Light source : | LED |
Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
Ambient storage temperature: | -25 °C ... +75 °C |
Connection type: | Connector M12, 4-pin |
People also buy
Comments
No comments yet