Sick NTL6-B18
Registration sensors
- RGB, white LEDs and red lasers
- Bar graph display visually indicates contrast performance (KT5, KT10)
- High switching frequency
- Overview
- Comments
The product has been Discontinued by the Manufacturer!
Contact sales manager for a replacement.
Specification:
| Part Number | 1009754 |
| Enclosure rating: | IP 67 |
| Light spot size: | Dependent on the fiber-optic cable |
| Adjustment: | Manual adjustment, potentiometer |
| Pull-up/Pull-down resistor: | 22 k OHM |
| Light emission: | Long and short side of housing, exchangeable |
| Switching frequency: | 10 kHz |
| Response time: | > 50 µs |
| Sensing distance tolerance: | Dependent on the fiber-optic cablethe fiber-optic cable |
| Light source : | LED red, infrared |
| Function: | Light/dark switching |
| Switching mode: | PNP NPN |
| Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected |
| Output current Imax.: | 200 mA |
| Weight: | Approx. 540 g (with cable) |
| Sensing distance: | Dependent on the fiber-optic cablethe fiber-optic cable |
| Dimensions (L x W x H): | 64 mm x 80 mm x 30.4 mm |
| Power consumption : | < 80 mA |
| Ambient temperature: | Operation: 0 ... +50 °C, Storage: -25 ... +75 °C |
| Ripple : | ≤ 5 Vpp |
| Analog output QA: | 0.15 V ... 6 V |
| Supply voltage Vs: | DC 10 V ... 30 V |
| Connection type: | 2 m cable , 4 x 0.34 mm, shielded, PVC, diameter 6 mm |
| Switching output: | B: HIGH = Uv - < 2 V / LOW = < 2 V |
People also buy
Comments
No comments yet