Eltra Encoder EA 58 - 63 A-B-D-E-F-G

Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).

Singleturn Absolute Optical Encoder

Solid shaft singleturn absolute encoder with clamping flange (diam. 36 mm).

Solid shaft singleturn absolute encoder with centering square flange (diam. 31,75 mm).

Optical rotary encoder

Solid shaft singleturn absolute encoder with centering square flange (diam. 50 mm).

Binary code encoder

Solid shaft single turn absolute encoder with centering square flange.

Solid shaft singleturn absolute encoder.

Solid shaft singleturn absolute encoder Eltra.

Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).

Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).

Solid shaft singleturn absolute encoder.

Solid shaft singleturn absolute encoder.
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).
Solid shaft singleturn absolute encoder with synchronous flange (diam. 50 mm).

EA 58 B-C - 63 A-D-E

Eltra EA58 and EA63 enoder series has solid shaft and can be ordered with parallel, SSI or Profibus electronics.
Resolutions of parallel encoders is up to 13 bit and 8192 ppr. This series assures high reliability even in the most tough industrial applications.  It is available output with several electronics.
Series SSI is designed to satisfy the new serial transmission philosophy of data output. The standard output for these encoders is a 13 bit word data.

Equipment ELTRA specially designed by highly qualified specialists and is according to all European and International quality standards.
All equipment produced by ELTRA  has high quality and is reliable.

EA 58-63 A / B / C / D / E MAIN FEATURES:

  • ø 58-63  mm
  • Parallel / SSI Interface
  • Solid shaft
  • Up to 8192 ppr.
  • Singleturn optical
  • Up to IP66 sealing
  • Up to 13 bit  resolution.
  • Up to 25 kHz frequency response

EA 58 - 63 Profibus

Profibus series of EA58/63 Eltra encoders allows following:

  • During the periodic data exchange, getting the indication of the angular position from the encoder.
  • During the set up, setting the resolution as number positions within the single turn.
  • During the set up, changing the default increase direction count.
  • To perform the PRESET operation (set the encoder to read a specific position).
  • Reading the diagnostic operating mode.
  • Getting info about the code supplied by the device.

THE MAIN FEATURES:

  • Solid shaft
  • Up to IP66 sealing
  • Singleturn optical
  • Up to 13 bit  resolution.
  • Up to 12 Mbaud
  • Working temperature:  0° ... +60°C
  • Maximum resolution  8192 ppr

Directly from the device it is possible:

  • To display the ON/OFF status.
  • To display the device activity on the bus.
  • Setting the device address.
  • If requested, inserting in the bus the termination resistance.
  • Inverting the counting direction.

EA 58F - EA 63 F-G Profibus

Eltra EA58F, EA63F, EA63G series of blind hollow shaft encoders is complying to the Profibus DP standard as described on the European Standard EN 50170 Volume 2. (Particularly, Eltra Profibus encoders are according to “PROFIBUS-Profile for Encoders, Order No. 3.062”).

The Profibus DP interface maintains the same maximum resolution and characteristics (8192 ppr) of the stand-alone version and adds the plus of the Profibus DP network.

The MAIN FEATURES:

  • ø 58-63 mmBlind hollow shaft
  • Up to IP66 sealing
  • Singleturn optical
  • Up to 13 bit  resolution
  • Up to 12 Mbaud
  • Working temperature:  0° ... +60°C
  • Maximum resolution  8192 ppr

EA 63 AX-DX

Eltra EA63AX and EA63DX absolute encoders have SSI output and enclosure from stainless steel.Due to this fact they can be used in beverage and food machinery, winches, cranes, oil refinery, washing systems and others where is required high corrosion resistance.

This encoders can prevent the loss of information in case of power failure.

MAIN FEATURES ELTRA EA 63 AX / DX - SSI:

  • ø 63 mmSingleturn optical
  • Up to IP66 sealing
  • Up to 13 bit  resolution.
  • Up to 100 kHz ... 1 MHz
  • Working temperature:  0° ... +60°C
EA58B256G8/28PPX10SP3DA
EA58BM4096G8
EA58C1024G8/28PPX10X3MAR
EA58C4096G8/28PPX
EA63A4096G8/28PP
EA63D360G8/28PP10X3MAR
EA63D360G8/28PPX8X3PDR
EA63E1024B8/28PPX10X6PDR