Pepperl+Fuchs BB10-P/59/76b/102/115e Thru-beam sensor

Pepperl+Fuchs BB10-P/59/76b/102/115e
Item Number: BB10-P/59/76b/102/115e
  • Single-beam miniature photoelectric sensor, ideal for installing in frames or contours
  • Integrated circuit
  • Plug-in style housing for 13 mm hole
  • Narrow opening angle, suitable for mounting in pairs
  • Dark on version
  • Version with test input
Price on Request
Quantity
-
+
Total price: 0.00
Contact our experts
  • Overview
  • Datasheet
  • Alternative numbers
  • PDF
  • Comments
Switching currentmax. 100 mA
Angle of divergenceEmitter: +/- 8 В° Receiver: +/- 10 В°
Signal output1 NPN output, short-circuit protected, reverse polarity protected, open collector
ReceiverBB10-R/59/102/115e
MTTFd795 a
Threshold detection range8 m
Product standardEN 60947-5-2
Mission Time (TM)20 a
CCC approvalCCC approval / marking not required for products rated ≤36 V
Diagnostic Coverage (DC)0 %
Connection0.15 m cable with 3-pin JST connector Receiver: grey ; Emitter: black
EmitterBB10-T/76b/115e
Effective detection range0 ... 6 m
Optical facefrontal
Massapprox. 25 g per device
Voltage drop≤ 1.5 V DC
Response time8 ms
Switching frequency62.5 Hz
Switching voltagemax. 30 V DC
Operating voltage10 ... 30 V DC
Ambient temperature-40 ... 60 В°C (-40 ... 140 В°F) , fixed
-20 ... 60 В°C (-4 ... 140 В°F) , movable
Diameter of the light spotapprox. 1300 mm at a distance of 6 m
Relative humidity90 % , noncondensing
Accessories providednone
Ambient light limithalogen light 100000 Lux ; according to EN 60947-5-2:2007
Storage temperature-40 ... 70 В°C (-40 ... 158 В°F)
Function indicatorLED red: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted
Light typemodulated infrared light , 880 nm
Light sourceIRED
Degree of protectionIP67
Switching typedark on
Test inputemitter deactivation at 0 V
No-load supply currentEmitter: ≤ 20 mA
Receiver: ≤ 10 mA

Comments

No comments yet

Write a comment

in international format without spaces
All fields are required